[Self-Diagnostic Setting]
Overview
A self-diagnostic test will be performed automatically to check the security functions if [Enhanced Security Mode] is set to [ON] and the system is powered on.
In this function, manually perform the diagnosis.
Tips
The following items can be diagnosed via the self-diagnostic test.
- [Firmware Diagnosis]: Are programs written correctly?
- [Device Diagnosis]: Are devices containing settings information used for the security functions operating correctly?
Reference
- For details on the Enhanced Security Mode, refer to [Enhanced Security Mode].
Specifications
Category | Network / Security, Device Management | ||
Location | Machine | Control Panel | |
Printer driver | - | ||
Application | - | ||
Required options | - | ||
Required items | - | ||
Setting items | [Firmware Diagnosis] | Diagnose whether the encryption program was created in line with standards. | |
[Device Diagnosis] | Verify the operations of non-volatile memory and operations of SSD and HDD installed in the system or image controller. | ||
[Return] | Moves to the previous screen. | ||
Remarks | - | ||
Reference | - | ||
Screen access | Control panel - Utility/Counter - [Administrator Setting] - [Security Setting] - [Security Details] - [Self-Diagnostic Setting] | ||
Procedure
1
Press [Firmware Diagnosis] or [Device Diagnosis].
This starts the diagnosis of the selected item. If there are no security-related problems after diagnosis is completed, [OK] is displayed.
If there are any security-related problems, an error occurs. Contact the relevant service center for help to recover from an error.
in the upper-right of a page, it turns into 
and is registered as a bookmark.