Administrator Setting | [FD-Mag. Adjustment]

[FD-Mag. Adjustment]

Adjust the magnification in the paper feed direction when using the ADF.

Scanning accuracy is maintained by making regular adjustments.

NOTICE

Reference

For details about [FD-Mag. Adjustment] in [Printer Adjustment], refer to [FD-Mag. Adjustment].

Category		Adjustment / Maintenance
Location	Machine	Touch Panel, Control Panel
	Printer driver	-
	Application	-
Required options		Paper Feeder Unit PF-713
Required items		-
Setting items		[Current Data]	Displays the adjustment value of the current magnification in the paper feed direction.
		Keypad	Used to enter numeric values.
		[Clear]	Returns the entered numeric value to "0".
		[Set]	Sets the numeric value entered using the keypad to the selected setting item.
Remarks		-
Reference		-
Screen access		Touch panel - [MACHINE] - [Adjustment] - [ADF Adjustment] - [FD-Mag. Adjustment]
		Control panel - Utility/Counter - [Administrator Setting] - [System Setting] - [Expert Adjustment] - [ADF Adjustment] - [FD-Mag. Adjustment]

Press [Print Mode].

Load A4 paper into the paper tray, and select that paper tray.

Place a test chart in the ADF tray, and press Start on the Control panel.

The test chart is scanned and a sample is printed out.

Load the test chart with the front side facing upward.

Measure the length in the paper feed direction, and compare the measured value with the chart.

Standard value: 0 mm ^ 1.0 mm

If any adjustments are required, press [Exit PrintMode] to return to the setting screen.

Use the on-screen keypad to enter the numeric value.

Use [+]/[-] to select the plus or minus of the numeric value. To change [Current Data], press [Set].

[Adj. Range:-20~+20 1step = 0.1%]

Repeat step 1 to step 6 until the desired result is obtained.