Administrator Setting | [Date/Time Setting]

[Date/Time Setting]

Set the system date and time, the daylight saving time, and the time zone.

Tips

The set date and time are used for audit logs. To enhance the accuracy of audit logs, set the exact date and time.
To set the time zone, also set a time lag with the normal time.

Category		Device Management
Location	Machine	Control Panel
	Printer driver	-
	Application	-
Required options		-
Required items		-
Setting items		[Current Time]	The screen shows the current setting of time in the following order: - Metric area: Day, Month, Year, Time (24-hour format) - Inch area: Month, Day, Year, Time (24-hour format)
		[Setting Time]	Sets the time displayed on this system.
		[Daylight Saving Time]	-[OFF]	Does not use the daylight saving time function.
			[ON]	Uses the daylight saving time function. You can set the time to advance.
		[Time Zone]	Sets the time difference from the standard time.
		[Time Adjustment]	The setting is not available in this option.
		Keypad	Used to enter numeric values.
		[+ / -]	Sets whether the time is earlier or later than universal time. [+] (early) and [-] (late) are toggled each time this key is pressed.
		[Set]	Sets the entered numeric value.
		[Cancel]	Moves to the previous screen without saving the settings.
		[OK]	Saves the settings and moves to the previous screen.
Remarks		-
Reference		-
Screen access		Control panel - Utility/Counter - [User Setting] - [System Setting] - [Date/Time Setting]
		Control panel - Utility/Counter - [Administrator Setting] - [System Setting] - [Date/Time Setting]

Use the on-screen keypad or Keypad of the Control panel to enter "year" of [Setting Time].

For "year", enter the last two digits of the year.

To set the entered numeric value, press [Set].

The highlighted area shifts to the right.

Set "month", "day", and "time" in the same way.

Press [ON] of [Daylight Saving Time].

Use the on-screen keypad or Keypad of the Control panel to enter the time to advance.

Press [Set].

The entered numeric value is set.

Press [Time Zone].

Use the on-screen keypad or Keypad of the Control panel to enter the time difference from universal time.

Set whether the time is earlier or later than universal time in [+ / -].

For example, enter "-06:00" for six hours later than universal time.

Press [Set].

The entered numeric value is set.

Press [OK].