User's Guide

Bookmark

> Administrator Setting > [Density Balance Adjustment] > [Density Balance Data Reg/Del] > [Density Balance Data Reg/Del] Screen

[Density Balance Data Reg/Del] Screen

Overview

Register new colorimetric data and correct, duplicate or delete existing registered data.

Tips

Up to ten density balance adjustment values can be registered.

Specifications

Category		Print Workflow, Adjustment / Maintenance
Location	Machine	Control Panel
	Printer driver	-
	Application	-
Required options		-
Required items		-
Setting items		Density balance adjustment value list	Displays registered density balance adjustment values.
		[USB Flash Drive]	Registers the colorimetric data to the system using a USB flash drive. For details, refer to [USB Flash Drive].
		[Archived Data]	Registers the colorimetric data to this system via Web Utilities. For details, refer to [Archived Data].
		[Manual Setting]	Enter the density balance adjustment values manually and register them as new. Existing data can also be corrected. For details, refer to [Manual Setting].
		[Change Name]	Change [Adj. Data Profile Name]. For details, refer to [Change Name].
		[Copy]	Duplicates selected density balance adjustment values. It is not possible to duplicate if 10 density balance adjustment values are registered. Deletes any unnecessary values and then make further copies.
		[Delete]	Deletes selected density balance adjustment values. Press this key to display a dialog box, and then press [Yes] to delete the target.
		[Enable] / [Disable]	Select the density balance adjustment value to apply when outputting on the screen used for adjustment. The density balance adjustment value will be applied if set to [Enable]. Every time you press, [Enable] and [Disable].will be switched. Notes Only one adjustment item configured to the same screen, paper type or weight can be set to [Enable]. All other adjustment items will be automatically set to [Disable]. Density balance adjustment values that are grayed out (inactive) in the list column cannot be applied, even if [Enable] is selected. This is because the screen type selected on the system and the screen type for the inactive density balance adjustment values are different. If the screen is changed to the same screen type that is displayed in the list, it will return to the normal display enabling the selection of [Enable]. For more details about changing to custom screens, refer to [Custom Screen].
		[Confirm]	Confirm adjustment values.
		[Print Mode]	Outputs a chart for measurement.
Remarks		-
Reference		-
Screen access		Control panel - Utility/Counter - [Administrator Setting] - [System Setting] - [Expert Adjustment] - [Quality Adjustment] - [Density Balance Adjustment] - [Density Balance Data Reg/Del]

Filter by option

Filter by title

Filter by category

All of the functions in this user's guide are classified according to the category.
By selecting the check box for the desired category, you can narrow the search range.
Multiple choices are possible.

Filter by location

You can search according to the operation location or application.
Multiple choices are possible.

Filter by option

You can search according to the available functions or specifications of the installed options.
Select the check box for the desired option from the list of installed options.
Multiple choices are possible.

Filter by title

You can narrow the search range from the menu for this user's guide.
However, you cannot search using only the "Filter by title" option. When using this option, also select another search filter item.
Multiple choices are possible.