Administrator Setting | [Maximum Density Adjustment]

[Maximum Density Adjustment]

Adjust the maximum density for yellow, magenta, cyan, and black individually.

This function corrects differences from the target density values set by the customer engineer (CE), and ensures the printing quality.

NOTICE

Perform [Maximum Density Adjustment] using the paper used when registering the target density. If unregistered paper is used, adjustment cannot be performed correctly.
If Intelligent Quality Optimizer IQ-501 or Relay Unit RU-518m is mounted, perform [Max. Density Auto Adj.] first.

Tips

If you return to the [MACHINE] screen after performing [Maximum Density Adjustment], [Gamma Automatic Adj.] is performed. When [Gamma Automatic Adj.] is completed, be sure to perform calibration with the image controller.
Always perform [Color Density Manual Control] after changing the maximum density.

Reference

For details about the procedure of [Maximum Density Adjustment], refer to [Adjustment / Maintenance].

Category		Adjustment / Maintenance
Location	Machine	Touch Panel, Control Panel
	Printer driver	-
	Application	-
Required options		-
Required items		Colorimeter (only when Intelligent Quality Optimizer IQ-501 and Relay Unit RU-518m are not mounted)
Setting items		[-10]	After measuring the maximum density, select the adjustment value depending on [Density Measurement Result(Rough Value)]. Set the appropriate value for [< Yellow >], [< Magenta >], [< Cyan >], and [< Black >].
		[-9]
		[-8]
		[-7]
		[-6]
		[-5]
		[-4]
		[-3]
		[-2]
		[-1]
		[0]
		[+1]
		[+2]
		[+3]
		[+4]
		[+5]
		[+6]
		[+7]
		[+8]
		[+9]
		[+10]
		[Measurement History]	Displays the maximum density measurement history. The history is only displayed when Intelligent Quality Optimizer IQ-501 or Relay Unit RU-518m is mounted. For details, refer to [Max. Density Auto Adj.].
		[Print Mode]	Outputs a chart for measurement.
Remarks		-
Reference		-
Screen access		Touch panel - [MACHINE] - [Adjustment] - [Quality Adjustment] - [Maximum Density Adjustment]
		Control panel - Utility/Counter - [Administrator Setting] - [System Setting] - [Expert Adjustment] - [Process Adjustment] - [Maximum Density Adjustment]