[2nd Transfer Separate Timing:Front]
Overview
Set [2nd Transfer Separate Timing:Front].
Select the level when paper wrapping around the intermediate transfer belt or the 2nd transfer belt occurs while printing the front side in thin paper feeding mode.
Tips
- Each time the level raises, the loss amount of the image at the lead edge increases in increments of 1 mm / 0.039".
Specifications
Category | Print Workflow, Copy / Scan, Adjustment / Maintenance | ||
Location | Machine | Touch Panel | |
Printer driver | - | ||
Application | - | ||
Required options | - | ||
Required items | - | ||
Setting items | -[Auto] | Automatically switches the separation bias timing of the front side. This system automatically controls the loss amount of the image at the lead edge depending on the paper type or paper weight. | |
[OFF] | Does not automatically switch the separation bias timing of the front side. The loss amount of the image at the lead edge is fixed to 0 mm / 0" regardless of the paper type or paper weight. | ||
[1] | Select the separation bias timing level of the front side. | ||
[2] | |||
[3] | |||
[4] | |||
[5] | |||
[6] | |||
[7] | |||
Remarks | -: Default | ||
Reference | - | ||
Screen access | Touch panel - [MACHINE] - [Paper Setting] - [Change Set] - [Expert Adj.] | ||
Touch panel - [MACHINE] - [Paper Setting] - [New Setting] - [Expert Adj.] | |||
Touch panel - [MACHINE] - [Reg./Del.PaperSet.] - [Add/Edit] - [Paper Type] - [Expert Adj.] | |||
in the upper-right of a page, it turns into 
and is registered as a bookmark.