UTILITY items

01 Address Edit

Add or delete a destination. Also, edit registered information of a destination.

―

02 E-mail Title Setting

Register up to 5 E-mail subjects.

―

03 E-mail Text Setting

Register up to 5 E-mail texts.

―

01 Language Setting

Select the language used in the touch panel and voice messages.

Language used in LCD: Japanese, Hangul, Taiwan, Chinese, English, French, German, Italian, Spanish

Language in Voice Message: English, Japanese, OFF

02 Unit Setting

Select the unit of measurement for numeric values to be displayed on the touch panel.

mm, Inch(Decimal Point), Inch(Fraction)

03 Paper Tray Setting

01 Paper Setting

01 Paper Profile Setting

Register or delete the paper settings. Up to 500 can be registered.

Paper Type, Profile Name, Paper Size, Weight, Colored Paper, Punch, Both Sides Adj., RU Curl Adj., Air Assist, Thickness^*, Expert Adj., Color Density

Import, Export

*: Thickness is displayed when Image Controller IC-605 is mounted.

02 Preset Profile Management

Allows you to add or delete a profile.

Search Condition of profile

USB Import of Preset Profile, Delete, Add Profile

Delete of Paper Profile

02 Auto Tray Selection Setting

Select the tray to take over the feeding when the tray currently used becomes out of paper. This function is called Auto Tray Switch (ATS). When selecting multiple trays for ATS, determine the priority of the trays.

ATS/APS Switch: Tray1, Tray2, Tray3, Tray4, Tray5, Tray6, Tray7, Tray8, Tray9, Tray10, Tray11, Bypass

Tray Priority: Order of priority for selected trays.

03 Type for Auto Paper

Specify paper conditions that enable a tray to be selected in Auto Paper (APS).

Paper conditions to be specified here are Paper Type, Weight, Punch, Tab Paper, and Colored Paper.

Paper Type: Plain, Fine, Color Specific, Coated GL, Coated ML, Coated GO, Coated MO, Textured

Weight: 62-74g/m2 / 16-19 lb Bond, 75-80g/m2 / 20-21 lb Bond, 81-91g/m2/22-24 lb Bond, 92-105g/m2 / 25-28 lb Bond, 106-135g/m2 / 29-36 lb Bond, 136-176g/m2 / 37-47 lb Bond, 177-216g/m2 / 48-57 lb Bond, 217-256g/m2 / 58-68 lb Bond, 257-300g/m2 / 69-81 lb Bond, 301-350g/m2 / 82-93 lb Bond

Punch: Allow, Restrict

Tab Paper: Allow, Restrict

Colored Paper: White, Blue, Goldenrod, Gray, Green, Ivory, Orange, Pink, Red, Yellow, Cream, Others, User Color

04 Dehumidify Fan Heater

Set the operating conditions of the dehumidifying fan heater installed in the paper feeder unit (trays 3 to 11).

Dryness Preparation: ON, OFF

Fan Heater Control(Tray3), Fan Heater Control(Tray4), Fan Heater Control(Tray5), Fan Heater Control(Tray6), Fan Heater Control(Tray7), Fan Heater Control(Tray8), Fan Heater Control(Tray9), Fan Heater Control(Tray10), Fan Heater Control(Tray11): Auto, Compulsively ON, Compulsively OFF

04 Reset Setting

01 Auto Reset Setting

Resets copy, scan, and store conditions and returns to the default screen after a certain period of inactivity. Select the time interval to activate this function.

OFF, 60 seconds, 120 seconds, 180 seconds, 240 seconds, 300 seconds, 360 seconds, 420 seconds, 480 seconds, 540 seconds

02 Job Reset Setting

Specify whether or not to initialize job conditions when the machine takes it that the user has changed, or original document is loaded into the ADF. And select the conditions of the next job to be initialized each time a job has been completed.

Change User: ON, OFF

ADF Original Direction: Reset, Not Reset

Reset Button Function: Initialize, Full Auto

Mode Memory Auto Call: ON, OFF

Finisher Mode when Full Auto: Offset Sort, Offset Group, Sort, Group, Staple Sort, Fold & Staple, Multi Half Fold, Face Up, Face Down

Initial by Key Counter Insert: ON, OFF

Status Hold When Auto Reset: Not Keep, Keep

Next Job Staple Setting: Release, Do Not Release

Original Set/Bind Direction: Release, Do Not Release

05 Default Screen Setting

Select the screen to be displayed when the sub power switch is turned on or Auto Reset is activated.

MACHINE, JOB LIST/Hold Job, JOB LIST/Reserved Job, COPY

06 Set Zoom Ratio Setting

Modify predefined fixed ratios. Also, preset frequently used magnification ratios.

Fixed (Enlarge/Reduce): 8

Set Zoom Ratio: 3

07 Power Save Setting

01 Power Save Function Setting
Select the time to activate Auto Low Power and Auto Shut OFF. Also select either Auto Low Power or Auto Shut OFF to be activated when Power Save is pressed on the control panel.

You can also select the condition of Auto Wake-up to activate the machine when a print job is received during Auto Shut OFF.

Auto Low Power: --- min., 5 min., 10 min., 15 min., 30 min., 60 min., 90 min., 120 min., 240 min.
Power-saving time periods, 90 min., 120 min., and 240 min., may not be displayed depending on regions.
Auto Shut OFF: --- min., 0 min., 1 min., 30 min., 60 min., 90 min., 120 min., 240 min.
Power Save Function: Auto Low Power, Auto Shut OFF

Auto Wake-up Cond.: All Jobs

02 ErP Setting

Automatically turn off the main power switch when the sub power switch is turned off, or when Auto Shut OFF or Auto Low Power has been active for a certain time.

Do Not Switch, 12 Hours, 24 Hours, 36 Hours, 48 Hours, 60 Hours, 72 Hours

03 Mono Energy-save Mode

Set whether to run Monochrome printing in energy-save mode.

To reset the setting of Paper Setting for the main body tray, Power Save Function Setting, and Mono Energy-save Mode, press Reset.

ON, OFF

Reset

08 Date/Time Setting

Set the current date and time, the daylight-saving time, and the time difference.

Setting Time

Daylight Saving Time: OFF, ON (1 to 150 min.)

Time Zone: -12:00 to +13:00 (Default: +00:00)

09 Operation/Info. Sound Setting

01 Volume Setting

Specify whether to turn the operation sound and speaker sound on or off, and also set the volume when they are turned on.

Operation Sound: ON, OFF, (Small) 1, 2, 3, 4, 5, 6, 7, 8 (Big)

Speaker Sound: ON, OFF, (Small) 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 (Big) 

02 Info. Sound Item Setting

Specify each items provided for information sound and voice message.

Repeat Number Setting

Info. Sound Repeat Number: 1 time, 2 times, 3 times

Voice Repeat Number: 1 time, 2 times, 3 times

Notice Set for Machine Stop

Paper JAM: Voice, Info. Sound, OFF

Paper Empty: Voice, Info. Sound, OFF

Paper Differ: Voice, Info. Sound, OFF

Replenish Toner: Voice, Info. Sound, OFF

Service Call: Info. Sound, OFF

Output Full: Info. Sound, OFF

Other Notification Setting

Job Complete Pre-notice: Voice, OFF

Stop Button Acceptance: Voice, OFF

Sample Print Completion: Voice, OFF

Finisher Front Door Alert: Voice, OFF

Other Info. Sound Setting

For System Starting: Info. Sound, OFF

For Sample Printing^*: Info. Sound, OFF

For Print Job Receiving: Info. Sound, OFF

* This setting is displayed to function on the machine mounted with Image Controller IC-605.

10 Key Response Time

Select the time interval to get the response from the machine when a key is pressed on the touch panel.

Normal, 0.5 seconds, 1 second, 2 seconds, 3 seconds

11 Shortcut Key Register

01 Application(Copy)

Select shortcut keys to be displayed under Application on the COPY screen. Up to 4 addresses can be specified.

Insert Sheet, Combine, Booklet, Adhesive Binding, Book Copy, Non-Image Area Erase, Image Repeat, Frame Center Erase, Image Centering, Page Margin, Stamp, 180 Degrees Rotation, Program Job

02 Application(Scan)

SCAN screen - Select shortcut keys to be displayed under Application on the Scan Settings screen. Up to 2 keys can be selected.

Book Copy, Non-Image Area Erase, Frame Center Erase, Full Image Area, Annotation

03 Quality Adj. (Copy)

Select shortcut keys to be displayed under Quality Adj. on the COPY screen. Up to 4 keys can be selected.

Copy Density, Background Removal, Red, Green, Blue, Hue, Saturation, Brightness, Sharpness, Contrast, Image Distinction Level, Screen Pattern, Glossy, Color Balance  

04 Quality Adj. (Scan)

Select shortcut keys to be displayed under Quality Adj. on the Scan Settings screen of SCAN screen. Up to 4 keys can be selected.

Scan Density, Background Removal, Red, Green, Blue, Sharpness, Contrast, Image Distinction Level

05 Quality Adj. (Store)

Select shortcut keys to be displayed under Quality Adj. on the STORE screen. Up to 4 keys can be selected.

Scan Density, Background Removal, Red, Green, Blue, Sharpness, Contrast, Image Distinction Level

06 Quality Adj. Area Setting

COPY screen, SCAN screen - Select either shortcut keys or density setting to be displayed under Quality Adj. on the STORE screen.

Shortcut Display, Density Setting Display

07 Output Setting

Select shortcut keys to be displayed under Output Setting on the COPY screen. Up to 4 keys can be selected.

Fold, Multi Half Fold, Multi Tri-Fold^*, Fold & Staple, Staple, Punch, Offset Sort, Sort, Offset Group, Group, Perfect Binding, Ring Bind, Crease, 2-Side Slitting, External Finisher

* Tri-Fold is provided for the machine with Finisher FS-612 mounted.

08 Copy Mode Memory

Select the desired Copy Mode Memory shortcut key to be displayed under the COPY screen. Up to 6 addresses can be specified.

F1, F2, F3, F4, F5, F6

09 Scan Mode Memory

Select the desired Scan Mode Memory shortcut key to be displayed under the SCAN screen. Up to 6 addresses can be specified.

F1, F2, F3, F4, F5, F6

10 Store Mode Memory

Select the desired Store Mode Memory shortcut key to be displayed under the STORE screen. Up to 6 addresses can be specified.

F1, F2, F3, F4, F5, F6

12 Service Port Device Setting

Specify whether or not to use a service port device, and select the keyboard type if the service port device is used.

Service Port Device: ON, OFF

Keyboard Type: EN65, EN104, JP101, JP106 , JP109, UK, FR, IT, DE, ES

13 Mouse Setting

Select whether or not to use the Wheel Booster function and Cursor Auto Scrolling function, respectively, for when the mouse is connected.

Wheel Booster Setting: ON, OFF

When using this function, set List Scroll Speed and Value ScrollSpeed.

Cursor Auto Scrolling Set.: ON, OFF

When using this function, set Cursor Speed, Cancel Sensitivity, Prior Return Pos., and Prior Destination.

01 Copy Initial Setting

Specify the initial settings to be restored when Reset is pressed.

Copy Initial Setting: Original Setting, Quality Adj., Zoom, Simplex/Duplex, Output Setting, Color, Paper, Auto Paper, Image Rotation OFF, ADF, Store Setting

02 Scan Initial Setting

Specify the initial settings to be restored when Reset is pressed.

Scan Initial Setting: Original Setting, Quality Adj., Zoom, Application, Color, Color Space, Scan Size, Resolution (dpi), Simplex/Duplex, Default Server, ADF

03 Store Initial Setting

Specify the initial settings to be restored when Reset is pressed.

Store Initial Setting: Store Setting, Original Setting, Quality Adj., Zoom, Application, Scan Size, Simplex/Duplex, Color, ADF

One Shot Message Indication Time

Select the time span to display a shot message in the message area of the touch panel.

3 seconds, 5 seconds

Offset by Job Unit

Specify whether or not to offset the output sheets by job. Also specify the number of jobs to be offset when selecting ON for this function.

ON, OFF (Selecting ON: Offset Job Number)

Continuation Print

Specify whether or not to output multiple reserve jobs in succession without stopping the machine at a job break.

Copy ON, Copy OFF, Printer ON, Printer OFF

Back Side Magnification Adjustment

Select whether or not to activate the back side magnification adjustment mode.

ON, OFF

Fusing Stability (Mixed Media)

Select what to prioritize when fusing.

Best Quality, Better Quality, Speed

Prior Paper Type

Specify the temperature setting of the fusing section on standby. It can shorten the waiting time before printing by selecting a frequently used paper.

Others, Plain

Dash Length(Page Stamp)

Select the length of the dash to be used in a style of Page No. in Stamp.

For print jobs, the setting may not be available depending on the controller type.

Long, Short

Center Crop Mark Trim Margin

Specify the space between the center crop mark and image area (center crop mark trim margin).

0.0 mm-20.0 mm (Default: 1.0)

Schedule Cross Axis Unit (Default)

Select the unit of horizontal axis on the Schedule screen.

This setting is displayed to function on the machine mounted with Image Controller IC-605.

Timetable, Time Frame(m), Sheet Volume

Hold Job Status after Output (Default)

Select the default value to delete or save the data of hold job after outputting.

Delete, Save

Offset Output Mode

Specify how to offset the output sets.

Change Out Pos., Stop Print, Change Out Pos. + Partition Paper (Tray1, Tray2, Tray3, Tray4, Tray5, Tray6, Tray7, Tray8, Tray9, Tray10, Tray11, Bypass, PI1, PI2), Partition Paper (Tray1, Tray2, Tray3, Tray4, Tray5, Tray6, Tray7, Tray8, Tray9, Tray10, Tray11, Bypass, PI1, PI2)

Hold Job Direct Output (Default)

Select the default for the Direct Output check box under the Hold Job screen.

ON selects the check box, and OFF clears the check box.
After the change, turn OFF/ON the sub power switch to apply the setting.

ON, OFF

Needless Tab Paper Exit

Specify whether or not to automatically discharge the oddments of tabbed sheets loaded in a tray as a set for copy job.

ON, OFF

Remaining Memory (Measurement Unit)

Select the unit of displaying the remaining memory.

%, GB

Remaining Memory (Warning)

Select the percentage at which to give warning when the remaining memory is low.

5% or Less, 10% or Less

[Proof Copy] 1 Set/1st Sheet Selection

If it is turned ON, the confirmation window is opened and you are asked to output one confirmation copy or to output only its first page when the Proof Copy is pressed.

ON, OFF

Both Sides Rotate/Skew

If Disable is selected, the Rotate/Skew adjustment does not become available and does not function.

Enable, Disable

Stop when Water Tank Near Empty

Select whether to temporarily stop a job when the humidifier tank runs low on water.

Temporary Stop, Not Temporary Stop

Auto Image Adjustment Deviation Check

Select whether to automatically check a deviation. If you select ON, enter the specified value of a deviation.

This option is displayed when Integrated Color Care Unit IQ-501 is mounted on the machine.

ON (ON: 0.5 mm to 10.0 mm, Default: 2.0), OFF

Operation after Deviation Detected

Select an operation to be performed when a deviation is detected. When Continue Output is selected, specify the paper tray to feed partition paper and the number of detection times.

This option is displayed when Integrated Color Care Unit IQ-501 is mounted on the machine.

Stop, Continue Output, Partition Paper (Tray1, Tray2, Tray3, Tray4, Tray5, Tray6, Tray7, Tray8, Tray9, Tray10, Tray11, Bypass), Detection Count (2 ~ 10 times)

Select Chart Type (Auto Image Adj.)

Select an automatic image adjustment chart for each paper weight. The unit of weight can be switched.

This option is displayed when Integrated Color Care Unit IQ-501 is mounted on the machine.

62-74g/m2/16-19 lb Bond: Type1, Type2

75-80g/m2/20-21 lb Bond: Type1, Type2

81-91g/m2/22-24 lb Bond: Type1, Type2

92-105g/m2/25-28 lb Bond: Type1, Type2

106-135g/m2/29-36 lb Bond: Type1, Type2

136-176g/m2/37-47 lb Bond: Type1, Type2

177-216g/m2/48-57 lb Bond: Type1, Type2

217-256g/m2/58-68 lb Bond: Type1, Type2

257-300g/m2/69-81 lb Bond: Type1, Type2

301-350g/m2/82-93 lb Bond: Type1, Type2

Change Unit

Fold & Staple Auto Selection

Specify whether or not to automatically set the Booklet mode when Fold & Staple or Multi Half Fold mode is selected.

ON, OFF

Orig. Glass Auto Size Select

Specify whether or not to automatically select the same size of copy paper as the original when placed on the original glass.

ON, OFF

ADF Auto Size Select

Specify whether or not to automatically select the same size of copy paper as the original when placed on the ADF.

ON, OFF

Auto Zoom (Original Glass)

Specify whether or not to automatically set an appropriate magnification ratio to correspond to the selected paper size when detecting the original size placed on the original glass.

ON, OFF

Auto Zoom (ADF)

Specify whether or not to automatically set an appropriate magnification ratio to correspond to the selected paper size when detecting the original size placed on the ADF.

ON, OFF

Non-Image Area Erase

Specify the condition of Non-Image Area Erase function.

ON, APS/AMS, Except Orig. Glass (1:1)

ADF Frame Erase

Set to erase the frame when copying in ADF mode.

None, 1 mm, 2 mm, 3 mm, 4 mm, 5 mm

Interruption Suspend Setting

Set the timing to interrupt the current job when pressing Interrupt while copying.

Stop Immediately, WhenCurrentComp.

Printer Prohibit Timer

Set the time interval to suspend the print job via PC after the last operation of touch keys.

OFF, 15 seconds, 30 seconds, 60 seconds, 90 seconds

Orig./Out Bind Direction Set

Set whether or not to conform the bind direction in Output Setting with that specified in Original Setting.

ON, OFF

Specify Default Tray APS OFF

Specify the tray to be automatically selected when APS (Auto Paper) is canceled.

APS Tray, Tray 1, Tray 2, Tray 3, Tray 4, Tray 5, Tray 6, Tray 7, Tray 8, Tray 9, Tray 10, Tray 11, Bypass

(Selectable tray options vary depending on the option configuration. )

Scan Stop by Pull Out Tray

Specify whether or not to stop the scanning operation if any tray is pulled out.

ON, OFF

Blank Sheet Detection Level Adj.

Adjust the level to detect blank pages when Blank Page Removal is selected.

-2, -1, 0, +1, +2

01 Scan Address Default Setting

File Type Default E-mail

Select the default value of File Type for Scan to E-mail.

File Type: PDF, PDF/A-1a^*, PDF/A-1b^*, CompactPDF^*, CompactPDF/A-1a^*, CompactPDF/A-1b^*, TIFF, XPS^*, JPEG

Page Setting: Package, Divided

* This is available only when Image Controller IC-605 is mounted. 

File Type Default HDD

Select the default value of File Type for Scan to HDD.

This is not available on this machine.

-

File Type Default FTP

Select the default value of File Type for Scan to FTP.

File Type: PDF, PDF/A-1a^*, PDF/A-1b^*, CompactPDF^*, CompactPDF/A-1a^*, CompactPDF/A-1b^*, TIFF, XPS^*, JPEG

Page Setting: Package, Divided

* This is available only when Image Controller IC-605 is mounted. 

File Type Default SMB

Select the default value of File Type for Scan to SMB.

File Type: PDF, PDF/A-1a^*, PDF/A-1b^*, CompactPDF^*, CompactPDF/A-1a^*, CompactPDF/A-1b^*, TIFF, XPS^*, JPEG

Page Setting: Package, Divided

* This is available only when Image Controller IC-605 is mounted. 

File Type Default WebDAV

Select the default value of File Type for Scan to WebDAV.

This is available only when Image Controller IC-605 is mounted.

File Type: PDF, PDF/A-1a, PDF/A-1b, CompactPDF, CompactPDF/A-1a, CompactPDF/A-1b, TIFF, XPS, JPEG

Page Setting: Package, Divided

File Type Default USB

Select the default value of File Type for Scan to USB.

This is available only when Image Controller IC-605 is mounted.

File Type: PDF, PDF/A-1a, PDF/A-1b, CompactPDF, CompactPDF/A-1a, CompactPDF/A-1b, TIFF, XPS, JPEG

Page Setting: Package, Divided

Default Address

Select the default value (destination type) of the SCAN screen.

E-mail, HDD, FTP, SMB, WebDAV^*, USB Drive^*

* This is available only when Image Controller IC-605 is mounted. 

Compress Method Color/Gray

Select the default value of the level to compress data.

High Comp., Standard, Low Comp.

01 Outline Process

Select the Outline Process for printing.

Text Thinning: Weak+, Weak, Normal, Strong, Strong+

Halftone Text Enhancement: Weak+, Normal, Strong+, Strong (+1), Strong (+2)

FD Lead Edge Density Adjustment: 0, +1, +2, +3, +4, +5

FD Rear Edge Density Adjustment: -5, -4, -3, -2, -1, 0

02 Select Prior Output Tray

Select the output tray for the jobs for which the output tray is specified as "Auto". This menu item is to be displayed and allowed on the machine mounted with Finisher FS-531, Finisher FS-532, or Finisher FS-612.

Main Tray, Sub Tray

01 Original Density Shift

Adjust the original density shift amount in each original image quality mode for Full Color, Black, and Single Color, respectively.

Text/Photo (Print): -3 ~ +3

Text/Photo (Photo): -3 ~ +3

Photo (Print): -3 ~ +3

Photo (Photo): -3 ~ +3

Text: -3 ~ +3

Copied: -3 ~ +3

Map: -3 ~ +3

Inkjet: -3 ~ +3

(All values are set to 0 by default for each original mode. )

02 ACS Adjustment

Adjust the automatic color detection function.

Adjustment range: -2 ~ +2 (Default: 0)

01 Power Save Setting

01 Power Save Function Setting
Select the time to activate Auto Low Power and Auto Shut OFF. Also select either Auto Low Power or Auto Shut OFF to be activated when Power Save is pressed on the control panel.

You can also select the condition of Auto Wake-up to activate the machine when a print job is received during Auto Shut OFF.

Auto Low Power: --- min., 5 min., 10 min., 15 min., 30 min., 60 min., 90 min., 120 min., 240 min.

Power-saving time periods, 90 min., 120 min., and 240 min., may not be displayed depending on regions.

Auto Shut OFF: --- min., 0 min., 1 min., 30 min., 60 min., 90 min., 120 min., 240 min.

Power Save Function: Auto Low Power, Auto Shut OFF

Auto Wake-up Cond.: All Jobs

02 ErP Setting

Automatically turn off the main power switch when the sub power switch is turned off, or when Auto Shut OFF or Auto Low Power has been active for a certain time.

Do Not Switch, 12 Hours, 24 Hours, 36 Hours, 48 Hours, 60 Hours, 72 Hours

03 Mono Energy-save Mode

Set whether to run Monochrome printing in energy-save mode.

To reset the setting of Paper Setting for the main body tray, Power Save Function Setting, and Mono Energy-save Mode, press Reset.

ON, OFF

Reset

02 Date/Time Setting

Set the current date and time, the daylight-saving time, and the time difference.

Setting Time

Daylight Saving Time: OFF, ON (1 to 150 min.)

Time Zone: -12:00 to +13:00 (Default: +00:00)

03 Weekly Timer Setting

01 Weekly Timer ON/OFF Setting

Specify whether or not to use the Weekly Timer function.

Weekly Timer ON, Weekly Timer OFF

02 Time Setting

Set the ON/OFF times in hours and minutes.

―

03 Date Setting

Set the ON/OFF condition of the machine for a given day of a given month.

―

04 Select Time for Power Save

Set the machine to turn off and then on during the lunch break.

ON, OFF

05 Password Non-Business Hours

Set a password to use the machine by turning on the power temporarily while the machine is in off condition due to the Weekly Timer function.

Default password: 0000 (4 digits)

04 Restrict User Access

01 Lock/Delete Mode Memory

Lock the copy program, scan program, and stored program that have been registered so that they are not erased, or delete them.

When locked, overwriting or deletion is not available.

01 Copy Mode Memory

-

02 Scan Mode Memory

-

03 Store Mode Memory

-

02 Change Restrict Setting

Select whether to allow or to restrict to add, change, or delete a destination, and to change the registered magnifications.

Change Address Registration: Allow, Restrict

Change Set Zoom: Allow, Restrict

03 Scan Restriction Setting

Select whether to allow or to restrict to select or enter a destination for each destination type.

E-mail: Allow, Restrict

HDD: Allow, Restrict

FTP: Allow, Restrict

SMB: Allow, Restrict

WebDAV^*: Allow, Restrict

USB Flash Drive^*: Allow, Restrict

Manual Setting: Allow, Restrict

* This is available only when Image Controller IC-605 is mounted.

04 Function Usage Restriction

Specify whether or not to allow the use of various functions.

Sample Print: Allow, Restrict

USB Direct Print: Allow, Restrict

05 Expert Adjustment

01 Auto Background Dens. Adj.

Change the density level to be applied when Auto is selected for Back. Removal in Quality Adj. on the COPY screen.

Color: -2, -1, 0, 1, 2

Black: -2, -1, 0, 1, 2

02 Erase Correction

01 Non-Image Area Erase

Specify the conditions to be applied to the Non-Image Area Erase function.

Erase Outside of Original, ON - APS/AMS Only, Except Orig. Glass (1:1)

02 Erase Operation Setting

Set the Erase Mode when erasing the original, and set the original density.

You must select Erase Outside of Original in 01 Non-Image Area Erase.

Erase Mode/Orig. Density: Auto

Erase Mode (at automatic cancel): Oblique Erase, Rectangle Erase

Original Density (at automatic cancel): Dark+, Dark, Normal, Light, Light+

03 ADF Frame Erase

Set to erase the frame when copying in ADF mode.

None, 1 mm, 2 mm, 3 mm, 4 mm, 5 mm

03 Printer Adjustment

01 Restart Timing Adjustment

Adjust the image position of lead edge in paper feed direction in the printer engine.

Prerequisite:

FD-Mag. Adjustment is completed.

Objects of adjustment:

Restart Timing (Tray1), Restart Timing (Tray2), Restart Timing (Bypass), Restart Timing (Tray3), Restart Timing (Tray4), Restart Timing (Tray5), Restart Timing (Tray6), Restart Timing (Tray7), Restart Timing (Tray8), Restart Timing (Tray9), Restart Timing (Tray10), Restart Timing (Tray11), Restart Timing (Back), Tray Large Plain Offset,, Tray Large Thick Offset, Tray Small Plain Offset, Tray Small Thick Offset, Bypass Offset / L Plain, Bypass Offset / L Thick, Bypass Offset / S Plain, Bypass Offset / S Thick, Large Plain Offset (ADU), Large Thick Offset (ADU), Small Plain Offset (ADU), Small Thick Offset (ADU)

Adj. Range: -60~+60 1 step = 0.1 mm

[-] Lower [+] Higher

02 Centering Adjustment

Adjust the image position in the crosswise direction of the printer engine.

Prerequisite:

CD-Mag. Adjustment is completed.

Adjustment Range:

Tray1, Tray2, Bypass, Tray3, Tray4, Tray5, Tray6, Tray7, Tray8, Tray9, Tray10, Tray11, ADU, L Size Offset/Tray1, S Size Offset/Tray1, 8.5  5.5 Offset/Tray1, L Size Offset/Tray2, S Size Offset/Tray2, 8.5  5.5 Offset/Tray2, Bypass L Size Offset, Bypass S Size Offset, Bypass 8.5  5.5 Offset, L Size Offset/Tray3, S Size Offset/Tray3, L Size Offset/Tray4, S Size Offset/Tray4, L Size Offset/Tray5, S Size Offset/Tray5, L Size Offset/Tray6, S Size Offset/Tray6, L Size Offset/Tray7, S Size Offset/Tray7, L Size Offset/Tray8, S Size Offset/Tray8, L Size Offset/Tray9, S Size Offset/Tray9, L Size Offset/Tray10, S Size Offset/Tray10, L Size Offset/Tray11, S Size Offset/Tray11, Large Plain Offset/ADU, Large Thick Offset/ADU, Small Plain Offset/ADU, Small Thick Offset/ADU, 8.5 5.5 Plain Offset/ADU, 8.5 5.5 Thick Offset/ADU

Adj. Range: -40~+40 1 step = 0.1 mm

[-] Front [+] Back

03 FD-Mag. Adjustment

Adjust the magnification in paper feed direction in the printer engine.

Objects of adjustment:

Printer FD-Mag.

Adj. Range: -100~+100 1 step = 0.01 %

Objects of adjustment:

Tray1 Offset (ADU), Tray2 Offset (ADU), Bypass Offset (ADU), Tray3 Offset (ADU), Tray4 Offset (ADU), Tray5 Offset (ADU), Tray6 Offset (ADU), Tray7 Offset (ADU), Tray8 Offset (ADU), Tray9 Offset (ADU), Tray10 Offset (ADU), Tray11 Offset (ADU)

Adj. Range: -80~+20 1 step = 0.01 %

[-] Short [+] Long

04 CD-Mag. Adjustment

Adjust the magnification in crosswise direction in the printer engine.

Objects of adjustment:

Printer CD-Mag., Tray1 Offset (ADU), Tray2 Offset (ADU), Bypass Offset (ADU), Tray3 Offset (ADU), Tray4 Offset (ADU), Tray5 Offset (ADU), Tray6 Offset (ADU), Tray7 Offset (ADU), Tray8 Offset (ADU), Tray9 Offset (ADU), Tray10 Offset (ADU), Tray11 Offset (ADU)

Adj. Range: -100~+100 1 step = 0.01 %

[-] Short [+] Long

05 Lead Edge Erase Adjustment

Adjust the amount of image to be erased from the edge of the printed sheet.

Objects of adjustment:

Erase Amount

Adj. Range: -20~+40 1 step = 0.1 mm

[-] Short [+] Long

06 Registration Loop Adj.

Adjust the paper loop amount in registration roller section.

Objects of adjustment:

Tray1 Large Size, Tray1 Small Size , Tray2 Large Size, Tray2 Small Size , Bypass Large Size, Bypass Small Size, Tray3 Large Size, Tray3 Small Size, Tray4 Large Size, Tray4 Small Size, Tray5 Large Size, Tray5 Small Size, Tray6 Large Size, Tray6 Small Size, Tray7 Large Size, Tray7 Small Size, Tray8 Large Size, Tray8 Small Size, Tray9 Large Size, Tray9 Small Size, Tray10 Large Size, Tray10 Small Size, Tray11 Large Size, Tray11 Small Size, ADU Large Size, ADU Small Size, ADU Plain/W Under 150mm, ADU Thick/W Under 150mm, Thick

Adj. Range: -99~+99 1 step = 0.1 mm

[-] Short [+] Long

07 Pre-registration Adj.

Adjust the paper loop amount in pre-registration roller section of the trays.

When Paper Feed Unit PF-707m, Large Capacity Unit LU-202XLm, or Multi Bypass Tray MB-508 is mounted on the machine, if Tray3 to Tray11 or Bypass is selected, adjustments can be made for each paper weight. Also, to make adjustments for each paper weight, select 1st PFU Connecting Part, 2nd PFU Connecting Part, Bypass Connecting Part, or Tray6 Connecting Part when Paper Feed Unit PF-707m is mounted in 2-unit connection or 3-unit connection mode or when Paper Feed Unit PF-707m is equipped with Large Capacity Unit LU-202XLm, Multi Bypass Tray MB-508, or both.  

Objects of Adjustment:

~ 105g/m2, 106 ~ 256g/m2, 257g/m2 ~, Envelope

Tray1, Tray2, Bypass, Tray3, Tray4, Tray5, Tray6, Tray7, Tray8, Tray9, Tray10, Tray11, ADU Large Size, ADU Small Size, ADU width 150mm or less, 1st PFU Connecting Part, 2nd PFU Connecting Part, Bypass Connecting Part, Tray6 Connecting Part

Adj. Range: -99~+99 1 step = 0.1 mm

[-] Short [+] Long

08 Print Job JAM Setting

Set whether or not to stop the machine as a paper jam when a mis-centering is detected. Select whether to display a message when the machine stops due to a paper jam or double feeding.

Mis-centering JAM Setting: Detect, Not Detect

JAM Identification Display: Display, Not Display

09 Speed Adjustment

Objects of Adjustment:

Registration Speed, Regist. Speed (Banner)

Adj. Range: -50~+50 1 step = 0.01%

[+] Fast [-] Slow

Objects of Adjustment:

Fusing Speed(Front Side), Fusing Speed (Back Offset), Reverse De-Curler Speed, Reverse Speed(RevExit), Reverse Speed(ADU), Banner Reverse Speed 1, Output De-Curler Speed, Banner Reverse Speed 2

Adj. Range: -200~+200 1 step = 0.01%

[+] Fast [-] Slow

Objects of Adjustment:

LCT Banner Regist. Speed

Adj. Range: -15~+5 1 step = 1%

[+] Fast [-] Slow

04 Finisher Adjustment (Finisher FS-532)

This menu item is to be displayed and allowed on the machine mounted with Finisher FS-532.

01 Staple Finisher Adjustment

01 Staple Finisher(Main)Adj.

01 Exit Guide Paper Width Adj.

Adjust the exit guide alignment pitch to be used by the staple finisher.

Make adjustment if output paper stack on main tray is uneven in straight delivery.

Objects of adjustment:

Offset for All Size, SRA3 short edge feed, A3 short edge feed, SRA4 short edge feed, A4 long edge feed, A4 short edge feed, A5 long edge feed, B4 short edge feed, B5 long edge feed, 8K short edge feed, 16K long edge feed, 12 18 short edge feed, 11 17 short edge feed, 9 11 long edge feed, 8.5 11 long edge feed, 8.5 11 short edge feed, 8.5 14 short edge feed, 8 13 short edge feed, 13  19 short edge feed, B5 short edge feed, A6 short edge feed/Postcard, SRA4 long edge feed, B6 short edge feed, 16K short edge feed, Custom(380~488 mm), Custom(220~379 mm), Custom(139~219 mm)

Adj. Range: -50~+50 1 step = 0.1 mm

[-] Wide [+] Narrow

02 Upper Gripper Operation

Select the upper gripper operation for main tray outlet.

Auto, ON, OFF

03 Output Alignment Operation

Select operation for output alignment.

Auto, ON, OFF

04 Staple Paper Width Adj.

Adjust the board alignment width of the staples in the staple finisher.

Objects of adjustment:

Offset for All Size, SRA3 short edge feed, A3 short edge feed, SRA4 short edge feed, A4 long edge feed, A4 short edge feed, A5 long edge feed, B4 short edge feed, B5 long edge feed, 8K short edge feed, 16K long edge feed, 12 18 short edge feed, 11 17 short edge feed, 9 11 long edge feed, 8.5 11 long edge feed, 8.5 11 short edge feed, 8.5 14 short edge feed, 8 13 short edge feed, 13 19 short edge feed, SRA4 long edge feed, 16K short edge feed, Custom(380~488 mm), Custom(220~379 mm), Custom(139~219 mm)

Adj. Range: -20~+20 1 step = 0.1 mm

[-] Wide [+] Narrow

05 FD Alignment Plate Adj.

Adjust the vertical alignment fitting for staples in the staple finisher.

Objects of adjustment:

Offset for All Size, A4 long edge feed, B5 long edge feed, A5 long edge feed, 8.5 11 long edge feed, 16K long edge feed, 9 11 long edge feed, Custom(139~230 mm)

Adj. Range: -50~+50 1 step = 0.1 mm

[-] Wide [+] Narrow

06 Staple Position Adjustment

Adjust 2 position staple pitch and corner staple positions in staple finisher.

Objects of adjustment:

2 Position Pitch(120 mm), 2 Position Pitch(140 mm), 2 Position Pitch(165 mm), Rear Diagonal

Adj. Range: -5~+5 1 step = 1 mm

Objects of adjustment:

Rear Parallel, Front Parallel

Adj. Range: -3~+3 1 step = 1 mm

[-] Narrow [+] Wide

07 Rewind Paddle Descent Adj.

Adjust rewind paddle descent.

Objects of adjustment:

Offset for All Size, SRA3 short edge feed, A3 short edge feed, SRA4 short edge feed, A4 long edge feed, A4 short edge feed, A5 long edge feed, B4 short edge feed, B5 long edge feed, 8K short edge feed, 16K long edge feed, 12 18 short edge feed, 11 17 short edge feed, 9 11 long edge feed, 8.5 11 long edge feed, 8.5 11 short edge feed, 8.5 14 short edge feed, 8 13 short edge feed, 13  19 short edge feed, SRA4 long edge feed, 16K short edge feed, Custom(380~488 mm), Custom(220~379 mm), Custom(139~219 mm)

Adj. Range: -10~+10 1 step = 0.2 mm

[-] Little [+] Much

08 Rewind Function Operation

Select the rewind paddle operation.

Auto, ON, OFF

02 Staple Finisher(Fold) Adj.

This menu item is to be displayed and become configurable on Finisher FS-532 mounted with Saddle Stitcher SD-510.

01 Fold&Staple Paper Width Adj.

Adjust pitch of alignment plate in Saddle Stitcher SD-510 if half-folded or multi tri-folded sheets show misalignment.

Objects of adjustment:

Offset for All Size, SRA3 short edge feed, 12 18 short edge feed, A3 short edge feed, 11 17 short edge feed, 8K short edge feed, B4 short edge feed, SRA4 short edge feed, 8.5 14 short edge feed, 8.5 11 short edge feed, B5 short edge feed, A4 short edge feed, 16K short edge feed, 8 13 short edge feed, 13  19 short edge feed, Custom(380~488 mm), Custom(240~379 mm)

Adj. Range: -50~+50 1 step = 0.1 mm

[-] Narrow [+] Wide

02 Fold&Staple Pitch Adjustment

Adjust staple pitch in Saddle Stitcher SD-510. Make this adjustment if staple pitch is not within the allowance range.

Objects of adjustment:

Offset for All Size, SRA3 short edge feed, 12 18 short edge feed, A3 short edge feed, 11 17 short edge feed, 8K short edge feed, B4 short edge feed, SRA4 short edge feed, 8.5 14 short edge feed, 8.5 11 short edge feed, B5 short edge feed, A4 short edge feed, 16K short edge feed, 8 13 short edge feed, 13  19 short edge feed, Custom(380~488 mm), Custom(240~379 mm)

Adj. Range: -300~+300 1 step = 0.1 mm

Staple pitch: [-] Narrow [+] Wide

03 Fold&Staple Fold Position

Adjust half-fold position of fold & staple function in Saddle Stitcher SD-510. Make this adjustment if half-fold position is not within the specified range.

Objects of adjustment:

Offset for All Size, SRA3 short edge feed, 12 18 short edge feed, A3 short edge feed, 11 17 short edge feed, 8K short edge feed, B4 short edge feed, SRA4 short edge feed, 8.5 14 short edge feed, 8.5 11 short edge feed, B5 short edge feed, A4 short edge feed, 16K short edge feed, 8 13 short edge feed, 13  19 short edge feed, Custom(380~488 mm), Custom(240~379 mm)

Adj. Range: -50~+50 1 step = 0.1 mm

Top face of output paper: [-] Extend [+] Shorten

04 Fold&Staple Staple Position

Adjust staple position in Saddle Stitcher SD-510.

Objects of adjustment:

Offset for All Size, SRA3 short edge feed, 12 18 short edge feed, A3 short edge feed, 11 17 short edge feed, 8K short edge feed, B4 short edge feed, SRA4 short edge feed, 8.5 14 short edge feed, 8.5 11 short edge feed, B5 short edge feed, A4 short edge feed, 16K short edge feed, 8 13 short edge feed, 13  19 short edge feed, Custom(380~488 mm), Custom(240~379 mm)

Adj. Range: -50~+50 1 step = 0.1 mm

Top face of output paper: [-] Extend [+] Shorten

05 Half-Fold Fold Position Adj.

Adjust half-fold position of fold function in Saddle Stitcher SD-510.

Objects of adjustment:

Offset for All Size, SRA3 short edge feed, 12 18 short edge feed, A3 short edge feed, 11 17 short edge feed, 8K short edge feed, B4 short edge feed, SRA4 short edge feed, 8.5 14 short edge feed, 8.5 11 short edge feed, B5 short edge feed, A4 short edge feed, 16K short edge feed, 8 13 short edge feed, 13  19 short edge feed, Custom(380~488 mm), Custom(240~379 mm)

Adj. Range: -50~+50 1 step = 0.1 mm

Top face of output paper: [-] Extend [+] Shorten

06 Tri-Fold Adjustment

01 Tri-Fold Position Adj.

Adjust Fold 1 and Fold 2 positions for multi tri-folding in Saddle Stitcher SD-510.

Make this adjustment if each fold position for tri-folding is not within the allowance range.

Objects of adjustment:

8.5 11 short edge feed, A4 short edge feed, 16K short edge feed

Fold 1, Fold 2: Adj. Range: -50~+50 1 step = 0.1 mm

Fold 1: [-] Extend [+] Shorten

Fold 2: [-] Shorten [+] Extend

02 Double Fold Plate Adjustment

Adjust double fold plate in saddle stitcher.

Deepen in case of wide shift in bunch of the Fold 2.

Objects of adjustment:

8.5 11short edge feed, A4short edge feed, 16Kshort edge feed

Adj. Range: -50~+50 1 step = 0.1 mm

Quantity of inserting double fold plate: [-] Shallow [+] Deep

07 Half-Fold Strength Adj.

To adjust the opening of booklets, increase the roller pressure time.

* You cannot adjust the strength to fold booklets.

* Long pressure time causes reduced productivity.

Adj. Range: 0~+10, 1 step = 1 sec

03 Staple Finisher(Punch) Adj.

This menu item is to be displayed and configurable on Finisher FS-532 mounted with Punch Kit PK-522.

01 Registration Adjustment

If the punch position is not parallel to the paper edge, control the paper curl and wrinkle by adjusting the paper loop amount of the registration roller.

Adj. Range: -50~+50 1 step = 0.1 mm

[-] Short [+] Long

02 Horizontal Position Adj.(FD)

Adjust the distance between the edge of the printed paper and the center of punch holes.

Objects of adjustment:

Offset for All Size, A3 short edge feed, A4 long edge feed, A4 short edge feed, SRA4 short edge feed, A5 long edge feed, B4 short edge feed, B5 long edge feed, 8K short edge feed, 16K long edge feed, 16K short edge feed, 8.5 14 short edge feed, 8.5 11 long edge feed, 8.5 11 short edge feed, 12 18 short edge feed, 11 17 short edge feed, 8 13 short edge feed, 5.5 8.5 long edge feed, 9 11 long edge feed, B5 short edge feed

Adj. Range: -50~+50 1 step = 0.1 mm

Punch position at paper edge: [-] Far [+] Close

03 Vertical Position Adj.(CD)

Adjust the misalignment in center positions of paper and punch holes for each paper size.

Objects of adjustment:

Offset for All Size, A3 short edge feed, A4 long edge feed, A4 short edge feed, SRA4 short edge feed, A5 long edge feed, B4 short edge feed, B5 long edge feed, 8K short edge feed, 16K long edge feed, 16K short edge feed, 8.5 14 short edge feed, 8.5 11 long edge feed, 8.5 11 short edge feed, 12 18 short edge feed, 11 17 short edge feed, 8 13 short edge feed, 5.5 8.5 long edge feed, 9 11 long edge feed, B5 short edge feed

Adj. Range: -50~+50 1 step = 0.1 mm

Punch position: [-] Forward [+] Backward

04 Staple Finisher(PI) Adj.

This menu item is to be displayed and configurable on Finisher FS-532 mounted with Post Inserter PI-502.

01 PI Registration Adjustment

When paper fed from the Upper Tray or Lower Tray of Post Inserter PI-502 has skew or wrinkle, or causes paper jam, adjust the paper loop of the registration roller.

Objects of adjustment:

PI Upper Tray, PI Lower Tray

Adj. Range: -5~+5 1 step = 1.0 mm

[-] Short [+] Long

04 Finisher Adjustment (Output Tray OT-510)

This menu item is displayed and can be set on the machine mounted with Output Tray OT-510.

01 Staple Finisher Adjustment

01 Staple Finisher(Main)Adj.

01 Exit Guide Paper Width Adj.

Adjust the exit guide alignment pitch to be used by the staple finisher.

Make adjustment if output paper stack on main tray is uneven in straight delivery.

Objects of adjustment:

Offset for All Size, SRA3 short edge feed, A3 short edge feed, SRA4 short edge feed, A4 short edge feed, A4 long edge feed, A5 long edge feed, B4 short edge feed, B5 long edge feed, 8K short edge feed, 16K long edge feed, 12 18 short edge feed, 11 17 short edge feed, 9 11 long edge feed, 8.5 11 short edge feed, 8.5 11 long edge feed, 8.5  14 short edge feed, 8  13 short edge feed, 13  19 short edge feed, B5 short edge feed, A6 short edge feed/Postcard, SRA4 long edge feed, B6 short edge feed, 16K short edge feed, Custom(380~488 mm), Custom(220~379 mm), Custom(139~219 mm)

Adj. Range: -50~+50 1 step = 0.1 mm

[-] Wide [+] Narrow

02 Upper Gripper Operation

Select the upper gripper operation for main tray delivery exit.

Auto, ON, OFF

03 Output Alignment Operation

Select operation for output alignment.

Auto, ON, OFF

04 Finisher Adjustment (Folding Unit FD-503)

This menu item is to be displayed and allowed on the machine mounted with Folding Unit FD-503.

02 Multi Folder Adjustment

01 Multi Folder(Punch)Adj.

01 Paper Width Adjustment

Adjust the misalignment of punch hole positions.

Objects of adjustment:

Offset for All Size, A3 short edge feed, B4 short edge feed, SRA4 short edge feed, A4 short edge feed, B5 short edge feed, A4 long edge feed, A5 short edge feed, B5 long edge feed, A5 long edge feed, 12 18 short edge feed, 11 17 short edge feed, 8.5 14 short edge feed, 8.5 11 short edge feed, 8.5 11 long edge feed, 8 13 short edge feed, 8K short edge feed, 16K long edge feed, 16K short edge feed, 9 11 long edge feed

Adj. Range: -20~+20 1 step = 0.1 mm

[-] To reduce the randomness [+] To reduce the tilts

02 Punch Vertical Position Adj.

01 2-Hole Punch

Adjust the vertical position of punch holes made by the folding unit.

Objects of adjustment:

Offset for All Size, A3 short edge feed, B4 short edge feed, SRA4 short edge feed, A4 short edge feed, B5 short edge feed, A4 long edge feed, A5 short edge feed, B5 long edge feed, A5 long edge feed, 12 18 short edge feed, 11 17 short edge feed, 8.5 14 short edge feed, 8.5 11 short edge feed, 8.5 11 long edge feed, 8 13 short edge feed, 8K short edge feed, 16K long edge feed, 16K short edge feed, 9 11 long edge feed

Adj. Range: -40~+40 1 step = 0.1 mm

[-] To move to the center [+] To move to the edge

02 3-Hole Punch

Adjust the vertical position of punch holes made by the folding unit.

Objects of adjustment:

Offset for All Size, A3 short edge feed, B4 short edge feed, A4 long edge feed, B5 long edge feed, 12 18 short edge feed, 11 17 short edge feed, 8.5 11 long edge feed, 8K short edge feed, 16K long edge feed, 9 11 long edge feed

Adj. Range: -40~+40 1 step = 0.1 mm

[-] To move to the center [+] To move to the edge

02 4-Hole Punch

Adjust the vertical position of punch holes made by the folding unit.

Objects of adjustment:

Offset for All Size, A3 short edge feed, B4 short edge feed, A4 long edge feed, B5 long edge feed, 12 18 short edge feed, 11 17 short edge feed, 8.5 11 long edge feed, 8K short edge feed, 16K long edge feed, 9 11 long edge feed

Adj. Range: -40~+40 1 step = 0.1 mm

[-] To move to the center [+] To move to the edge

02 Multi Folder(Fold)Adj.

01 Half-Fold Position Adj.

Adjust the folded position for half-fold.

Objects of adjustment:

Offset for All Size, A3 short edge feed, B4 short edge feed, SRA4 short edge feed, A4 short edge feed, 12 18 short edge feed, 11 17 short edge feed, 8.5 14 short edge feed, 8.5 11 short edge feed, 8K short edge feed, Custom (380~458 mm), Custom (279~379 mm)

Adj. Range: -50~+50 1 step = 0.1 mm

[-] To shorten the top face [+] To lengthen the top face

02 Z-Fold Position Adj.

Adjust the fold positions for Z-folding.

Set Fold 1 and Fold 2 in sequence.

Objects of adjustment:

Offset for All Size, A3 short edge feed, B4 short edge feed, SRA4 short edge feed, A4 short edge feed, 12 18 short edge feed, 11 17 short edge feed, 8.5 14 short edge feed, 8.5 11 short edge feed, 8K short edge feed, Custom (380~458 mm), Custom (279~379 mm)

Fold 1, Fold 2: Adj. Range: -50~+50 1 step = 0.1 mm

Fold 1: To narrow [-] <-> [+] To widen

Fold 2: To narrow [-] <-> [+] To widen

03 Tri-Fold-in Pos. Adj.

Adjust the fold positions for tri-fold-in.

Set Fold 1 and Fold 2 in sequence.

Objects of adjustment:

Offset for All Size, A3 short edge feed, B4 short edge feed, SRA4 short edge feed, A4 short edge feed, 12 18 short edge feed, 11 17 short edge feed, 8.5 14 short edge feed, 8.5 11 short edge feed, 8K short edge feed, Custom (380~458 mm), Custom (279~379 mm)

Fold 1, Fold 2: Adj. Range: -50~+50 1 step = 0.1 mm

Fold 1: To narrow [-] <-> [+] To widen

Fold 2: To narrow [-] <-> [+] To widen

04 Tri-Fold-out Pos. Adj.

Adjust the fold positions for tri-fold-out.

Set Fold 1 and Fold 2 in sequence.

Objects of adjustment:

Offset for All Size, A3 short edge feed, B4 short edge feed, SRA4 short edge feed, A4 short edge feed, 12 18 short edge feed, 11 17 short edge feed, 8.5 14 short edge feed, 8.5 11 short edge feed, 8K short edge feed, Custom (380~458 mm), Custom (279~379 mm)

Fold 1, Fold 2: Adj. Range: -50~+50 1 step = 0.1 mm

Fold 1: To widen [-] <-> [+] To narrow

Fold 2: To narrow [-] <-> [+] To widen

05 Double Parallel Pos. Adj.

Adjust the fold positions for double parallel folding.

Set Fold 1 and Fold 2 in sequence.

Objects of adjustment:

Offset for All Size, A3 short edge feed, B4 short edge feed, SRA4 short edge feed, A4 short edge feed, 12 18 short edge feed, 11 17 short edge feed, 8.5 14 short edge feed, 8.5 11 short edge feed, 8K short edge feed, Custom (380~458 mm), Custom (279~379 mm)

Fold 1, Fold 2: Adj. Range: -50~+50 1 step = 0.1 mm

Fold 1: To narrow [-] <-> [+] To widen

Fold 2: To narrow [-] <-> [+] To widen

06 Gate Position Adj.

Adjust the fold position for gate folding.

Set in the order from Fold 1.

Objects of adjustment:

Offset for All Size, A3 short edge feed, B4 short edge feed, SRA4 short edge feed, A4 short edge feed, 12 18 short edge feed, 11 17 short edge feed, 8.5 14 short edge feed, 8.5 11 short edge feed, 8K short edge feed, Custom (380~458 mm), Custom (279~379 mm)

Fold 1, Fold 2, Fold 3: Adj. Range: -50~+50 1 step = 0.1 mm

Fold 1: To narrow [-] <-> [+] To widen

Fold 2: To widen [-] <-> [+] To narrow

Fold 3: To narrow [-] <-> [+] To widen

04 Finisher Adjustment (Large Capacity Stacker LS-506)

This menu item is to be displayed and allowed on the machine mounted with Large Capacity Stacker LS-506.

When two stackers are mounted, a setting can be configured for each stacker.

03 Stacker Adjustment

01 Paper Width Adjustment

Adjust the position of adjustment plates if output sheets show misalignment in crosswise direction on the stacker tray.

Objects of adjustment:

Stacker No. 1, Stacker No. 2

Adj. Range: -20~+20 1 step = 0.1 mm

[-] To reduce the dispersion [+] To reduce the distortion

02 Paper Length Adjustment

Adjust the position of the stopper if output sheets show misalignment in paper feed direction on the stacker tray.

Objects of adjustment:

Stacker No. 1, Stacker No. 2

Adj. Range: -20~+20 1 step = 0.1 mm

[-] To reduce the dispersion [+] To reduce the distortion

04 Finisher Adjustment (Saddle Stitcher SD-506)

This menu item is to be displayed and allowed on the machine mounted with Saddle Stitcher SD-506.

04 Saddle Stitcher Adjustment

01 Fold Paper Width Adj.

Adjust the width of adjustment plates if half-folded or tri-folded sheets show misalignment.

Objects of adjustment:

Offset for All Size, SRA3 short edge feed, A3 short edge feed, B4 short edge feed, SRA4 short edge feed, A4 short edge feed, B5 short edge feed, 12 18 short edge feed, 11 17 short edge feed, 8.5 14 short edge feed, 8.5 11 short edge feed, 8 13 short edge feed, 8K short edge feed, 16K short edge feed, Custom (380~463 mm), Custom (257~379 mm)

Adj. Range: -50~+50 1 step = 0.1 mm

[-] To reduce the misalignment [+] To reduce the distortion

02 Half-Fold Position Adj.

Adjust the fold position determined by the half-folder.

Objects of adjustment:

Offset for All Size, SRA3 short edge feed, A3 short edge feed, B4 short edge feed, SRA4 short edge feed, A4 short edge feed, B5 short edge feed, 12 18 short edge feed, 11 17 short edge feed, 8.5 14 short edge feed, 8.5 11 short edge feed, 8 13 short edge feed, 8K short edge feed, 16K short edge feed, Custom (380~463 mm), Custom (257~379 mm)

Adj. Range: -50~+50 1 step = 0.1 mm

[-] To shorten the top face [+] To lengthen the top face

03 Staple Paper Width Adj.

Adjust the width of adjustment plates of the saddle stitcher to be used in Staple mode.

Objects of adjustment:

Offset for All Size, SRA3 short edge feed, A3 short edge feed, B4 short edge feed, SRA4 short edge feed, A4 short edge feed, B5 short edge feed, 12 18 short edge feed, 11 17 short edge feed, 8.5 14 short edge feed, 8.5 11 short edge feed, 8 13 short edge feed, 8K short edge feed, 16K short edge feed, Custom (380~463 mm), Custom (257~379 mm)

Adj. Range: -20~+20 1 step = 0.1 mm

[-] To reduce the dispersion [+] To reduce the distortion

04 Staple Center Position

Adjust the center position of staples determined by the saddle stitcher.

Prerequisite: Staple paper width adjustment is completed.

Adj. Range: -20~+20 1 step = 0.1 mm

[-] To move closer to paper center (fold) [+] To move away from paper center (fold)

05 Staple Pitch Adjustment

Adjust the staple pitch determined by the saddle stitcher.

Objects of adjustment:

Offset for All Size, SRA3 short edge feed, A3 short edge feed, B4 short edge feed, SRA4 short edge feed, A4 short edge feed, B5 short edge feed, 12 18 short edge feed, 11 17 short edge feed, 8.5 14 short edge feed, 8.5 11 short edge feed, 8 13 short edge feed, 8K short edge feed, 16K short edge feed, Custom (380~463 mm), Custom (257~379 mm)

Adj. Range: -20~+20 1 step = 1.0 mm

[-] To shorten [+] To lengthen

06 Trimming Adjustment

Adjust the trimming width.
The trim width should be more than 2.0 mm, otherwise the trimming operation may not be performed properly.

Objects of adjustment:

Offset for All Size, SRA3 short edge feed, A3 short edge feed, B4 short edge feed, SRA4 short edge feed, A4 short edge feed, B5 short edge feed, 12 18 short edge feed, 11 17 short edge feed, 8.5 14 short edge feed, 8.5 11 short edge feed, 8 13 short edge feed, 8K short edge feed, 16K short edge feed, Custom (380~463 mm), Custom (257~379 mm)

Adj. Range: -400~+400 1 step = 0.1 mm

[-] To narrow [+] To widen

07 Tri-Fold Position Adj.

Adjust the folded positions in Tri-Fold mode.

Set Fold 1 and Fold 2 in sequence.

Objects of adjustment:

Offset for All Size, A4 short edge feed, 8.5 11 short edge feed

Fold 1, Fold 2: Adj. Range: -100~+100 1 step = 0.1 mm

Fold 1: To widen [-] <-> [+] To narrow

Fold 2: To narrow [-] <-> [+] To widen

08 Trimmer Receiver Adj.

Frequent trimming operations may cause damage to the receiver, resulting in trimming failures. Move the receiver automatically or manually.

*Trimmer Receiver Adj. is not displayed by default. To use this setting, please contact your service representative.

Objects of adjustment: Trim Count

Adjustment range: 700 times, 500 times, 300 times

Objects of adjustment: Move Pitch

Adjustment range: 1.0 mm, 1.5 mm, 2.0 mm

Execute Compulsive Movement

04 Finisher Adjustment (Saddle Stitcher SD-513)

This menu item is to be displayed and allowed on the machine mounted with Saddle Stitcher SD-513.

04 Saddle Stitcher Adjustment

01 Fold Paper Width Adj.

Adjust the width of adjustment plates if half-folded or tri-folded sheets show misalignment.

Adjustment Range:

Offset for All Size, SRA3 short edge feed, A3 short edge feed, B4 short edge feed, SRA4 short edge feed, A4 short edge feed, B5 short edge feed, 12 18 short edge feed, 11 17 short edge feed, 8.5 14 short edge feed, 8.5 11 short edge feed, 8 13 short edge feed, 8K short edge feed, 16K short edge feed, PI Paper, Custom(380~488 mm), Custom(257~379 mm), 13 19 short edge feed

Adj. Range: -50~+50 1 step = 0.1 mm

[-] To reduce the misalignment [+] To reduce the distortion

02 Fold Skew Adjustment

Adjust the skew of the folding line.

Objects of adjustment: Single Fold, Multi Fold

Adjustment Range:

Offset for All Size, SRA3 short edge feed, A3 short edge feed, B4 short edge feed, SRA4 short edge feed, A4 short edge feed, B5 short edge feed, 12 18 short edge feed, 11 17 short edge feed, 8.5 14 short edge feed, 8.5 11 short edge feed, 8 13 short edge feed, 8K short edge feed, 16K short edge feed, PI Paper, Custom(380~488 mm), Custom(257~379 mm), 13 19 short edge feed

Adj. Range: -50~+50 1 step = 0.1 mm

[-] To weaken [+] To strengthen

03 Half-Fold Position Adj.

Adjust the folded position for half-fold.

Adjustment Range:

Offset for All Size, SRA3 short edge feed, A3 short edge feed, B4 short edge feed, SRA4 short edge feed, A4 short edge feed, B5 short edge feed, 12 18 short edge feed, 11 17 short edge feed, 8.5 14 short edge feed, 8.5 11 short edge feed, 8 13 short edge feed, 8K short edge feed, 16K short edge feed, Custom(380~488 mm), Custom(257~379 mm), 13 19 short edge feed

Adj. Range: -50~+50 1 step = 0.1 mm

[-] To shorten the top face [+] To lengthen the top face

04 Tri-Fold Position Adj.

Adjust the folded positions in Tri-Fold mode.

Adjust Fold 1to and Fold 2 in this order.

Adjustment Range:

Offset for All Size, A4 short edge feed, 8.5 11 short edge feed

Fold 1: Offset for All Size, A4 short edge feed

Adj. Range: -100~+90 1 step = 0.1 mm

Fold 1: 8.5 11 short edge feed

Adj. Range: -100~+30 1 step = 0.1 mm

Fold 2: Adj. Range: -50~+50 1 step = 0.1 mm

[-]: To narrow [+]: To widen

05 Crease Position Adjustment

Adjust the crease position.

01 Half-Fold Crease Position

Move the half-fold crease position.

Adjustment Range:

Offset for All Size, SRA3 short edge feed, A3 short edge feed, B4 short edge feed, SRA4 short edge feed, A4 short edge feed, B5 short edge feed, 12 18 short edge feed, 11 17 short edge feed, 8.5 14 short edge feed, 8.5 11 short edge feed, 8 13 short edge feed, 8K short edge feed, 16K short edge feed, Custom(380~488 mm), Custom(257~379 mm), 13  19 short edge feed

Adj. Range: -20~+20 1 step = 0.1 mm

[-] To shorten [+] To lengthen

02 Tri-Fold Crease Position

Move the tri-fold crease position.

Adjustment Range:

Offset for All Size, A4 short edge feed, 8.5 11 short edge feed

Fold 1, Fold 2: Adj. Range: -20~+20 1 step = 0.1 mm

[-] To shorten [+] To lengthen

03 PB Cover Crease Position

Move the perfect binding cover crease position.

Adjustment Range:

Crease Line 1, Crease Line 2: Offset for All Size, SRA3 short edge feed, A3 short edge feed, B4 short edge feed, SRA4 short edge feed, A4 short edge feed, B5 short edge feed, 12 18 short edge feed, 11 17 short edge feed, 8.5 14 short edge feed, 8.5 11 short edge feed, 8 13 short edge feed, 8K short edge feed, 16K short edge feed, Custom(380~488 mm), Custom(257~379 mm), 13  19 short edge feed

Adj. Range: -20~+20 1 step = 0.1 mm

[-] To shorten [+] To lengthen

06 Staple Paper Width Adj.

Adjust the width of adjustment plates of the saddle stitcher to be used in Staple mode.

Objects of adjustment:

Offset for All Size, SRA3 short edge feed, A3 short edge feed, B4 short edge feed, SRA4 short edge feed, A4 short edge feed, B5 short edge feed, 12 18 short edge feed, 11 17 short edge feed, 8.5 14 short edge feed, 8.5 11 short edge feed, 8 13 short edge feed, 8K short edge feed, 16K short edge feed, Custom(380~488 mm), Custom(257~379 mm), 13 19 short edge feed

Adj. Range: -20~+20 1 step = 0.1 mm

[-] To reduce the dispersion [+] To reduce the distortion

07 Staple Center Position

Adjust the center position of staples determined by the saddle stitcher.

Prerequisite: Staple paper width adjustment is completed.

01 2 Position Staple

Adjust the center position for 2-position staple.

Adj. Range: -20~+20 1 step = 0.1 mm

[-] To move rearward [+] To move frontward

02 4 Position Staple(Front 2)

Adjust the center position at two locations on the front edge for 4-position staple.

Objects of adjustment:

Offset for All Size, B4 short edge feed, 8K short edge feed, 11 17 short edge feed, A3 short edge feed, Custom(380~488 mm), Custom(257~379 mm)

Adj. Range: -100~+100 1 step = 0.1 mm

[-] To move rearward [+] To move frontward

03 4 Position Staple(Rear 2)

Adjust the center position at two locations on the rear edge for 4-position staple.

Objects of adjustment:

Offset for All Size, B4 short edge feed, 8K short edge feed, 11 17 short edge feed, A3 short edge feed, Custom(380~488 mm), Custom(257~379 mm)

Adj. Range: -100~+100 1 step = 0.1 mm

[-] To move rearward [+] To move frontward

08 Staple Pitch Adjustment

Adjust the staple pitch determined by the saddle stitcher.

01 2 Position Staple

Adjust the pitch for 2-position staple.

Adjustment range:

Offset for All Size, SRA3 short edge feed, A3 short edge feed, B4 short edge feed, SRA4 short edge feed, A4 short edge feed, B5 short edge feed, 12 18 short edge feed, 11 17 short edge feed, 8.5 14 short edge feed, 8.5 11 short edge feed, 8 13 short edge feed, 8K short edge feed, 16K short edge feed, Custom(380~488 mm), Custom(257~379 mm), 13  19 short edge feed

Adj. Range: -20~+20 1 step = 1.0 mm

[-] To shorten [+] To lengthen

02 4 Position Staple(Front 2)

Adjust the pitch at two locations on the front edge for 4-position staple.

Adjustment range:

Offset for All Size, B4 short edge feed, 8K short edge feed, 11 17 short edge feed, A3 short edge feed, Custom (380~488 mm), Custom (257~379 mm)

Adj. Range: -10~+10 1 step = 1 mm

[-] To shorten [+] To lengthen

03 4 Position Staple(Rear 2)

Adjust the pitch at two locations on the rear edge for 4-position staple.

Adjustment range:

Offset for All Size, B4 short edge feed, 8K short edge feed, 11 17 short edge feed, A3 short edge feed, Custom (380~488 mm), Custom (257~379 mm)

Adj. Range: -10~+10 1 step = 1 mm

[-] To shorten [+] To lengthen

09 Staple Offset Adjustment

Adjust the misalignment between the stapling positions and folding line.

Adj. Range: -10~+10 1 step = 0.1 mm

[-] To move leftward [+]: To move rightward

10 Staple Tip Adjustment

Change the staple leg shape.

Adj. Range: -9~+9 1 step = 1 msec

[-]: To be round [+] To be flat

11 Flattening a Fold(Strength)

Adjust the spine shape while changing the strength to form the book spine.

Adj. Range: -20~+20 1 step = 0.1 mm

[-] To decrease the force [+] To increase the force

12 Flattening a Fold(Freq.)

Adjust the number of roller reciprocation times to form the book spine.

Adj. Range: -5~+5 1 step = 1

[-] To decrease [+] To increase

13 Parallel Trimming Adjustment

Adjust the levelness between the trimming line and cut edge.

Adjustment range:

Front, Rear

Adj. Range: 0~+30 1 step = 0.1 mm

[Up the numerical value] To widen

[Down the numerical value] To narrow

14 Fore-edge Trimming Adj.

Adjust the trimming width.

The trimming width should be more than 5 mm, otherwise the trimming operation may not performed properly.

Adjustment range:

Offset for All Size, SRA3 short edge feed, A3 short edge feed, B4 short edge feed, SRA4 short edge feed, A4 short edge feed, B5 short edge feed, 12 18 short edge feed, 11 17 short edge feed, 8.5 14 short edge feed, 8.5 11 short edge feed, 8 13 short edge feed, 8K short edge feed, 16K short edge feed, Custom(380~488 mm), Custom(257~379 mm), 13  19 short edge feed

Adj. Range: -400~+400 1 step = 0.1 mm

[-] To narrow [+] To widen

15 2-Side Slitting Adjustment

Adjust the 2-side slitting.

Adjustment Range:

Front, Rear

Adj. Range: -10~+10 1 step = 0.1 mm

[-] To narrow [+] To widen

16 Trimmer Receiver Adj.

Frequent trimming operations may cause damage to the receiver, resulting in trimming failures. Move the receiver automatically or manually.

*Trimmer Receiver Adj. is not displayed by default. To use this setting, please contact your service representative.

Objects of adjustment: Trim Count

Adjustment range: 700 times, 500 times, 300 times

Objects of adjustment: Move Pitch

Adjustment range: 1.0 mm, 1.5 mm, 2.0 mm

Execute Compulsive Movement

04 Finisher Adjustment (Perfect Binder PB-503)

This menu item is to be displayed and allowed on the machine mounted with Perfect Binder PB-503.

05 Perfect Binder Adjustment

01 Sub Compile CD Width Adj.

Adjust misalignment or distortion in the crosswise direction of the body if detected. The sizes referred to in this section are those of bodies corresponding to cover sizes.

Objects of Adjustment:

Offset for All Size, A4 long edge feed, B5 long edge feed, A5 short edge feed, A5 long edge feed, 8.5 11 long edge feed, 5.5 8.5 short edge feed, 5.5 8.5 long edge feed, 16K long edge feed, Custom(220~379 mm), Custom(148~219 mm)

Adj. Range: -20~+20 1 step = 0.1 mm

[-] To reduce the distortion [+] To reduce the dispersion

02 Clamp CD Width Adjustment

Adjust misalignment or distortion in the crosswise direction of the body if detected. The sizes referred to in this section are those of bodies corresponding to cover sizes.

Objects of Adjustment:

Offset for All Size, A4 long edge feed, B5 long edge feed, A5 short edge feed, A5 long edge feed, 8.5 11 long edge feed, 5.5 8.5 short edge feed, 5.5 8.5 long edge feed, 16K long edge feed, Custom(220~379 mm), Custom(148~219 mm)

Adj. Range: -20~+20 1 step = 0.1 mm

[-] To reduce the distortion [+] To reduce the dispersion

03 Clamp FD Position Adj.

Adjust misalignment or distortion in the paper feed direction of the body if detected. The sizes referred to in this section are those of bodies corresponding to cover sizes.

Objects of Adjustment:

Offset for All Size, A4 long edge feed, B5 long edge feed, A5 short edge feed, A5 long edge feed, 8.5 11 long edge feed, 5.5 8.5 short edge feed, 5.5 8.5 long edge feed, 16K long edge feed, Custom(220~379 mm), Custom(148~219 mm)

Adj. Range: -20~+20 1 step = 0.1 mm

[-] To reduce the distortion [+] To reduce the dispersion

04 Glue Start Position

Adjust the position to start gluing on the body. The sizes referred to in this section are those of bodies corresponding to cover sizes.

Objects of Adjustment:

Ahead, Back: Offset for All Size, A4 long edge feed, B5 long edge feed, A5 short edge feed, A5 long edge feed, 8.5 11 long edge feed, 5.5 8.5 short edge feed, 5.5 8.5 long edge feed, 16K long edge feed, Custom(220~379 mm), Custom(148~219 mm)

Adj. Range: -128~+127 1 step = 0.1 mm

[-] To increase [+] To decrease

05 Glue Finish Position

Adjust the position to finish gluing on the body. The sizes referred to in this section are those of bodies corresponding to cover sizes.

Objects of Adjustment:

Ahead, Back: Offset for All Size, A4 long edge feed, B5 long edge feed, A5 short edge feed, A5 long edge feed, 8.5 11 long edge feed, 5.5 8.5 short edge feed, 5.5 8.5 long edge feed, 16K long edge feed, Custom(220~379 mm), Custom(148~219 mm)

Adj. Range: -128~+127 1 step = 0.1 mm

[-] To decrease [+] To increase

06 Cover Lead Edge Adj.

Adjust the position of the lead edge of the left cover sheet. The sizes referred to in this section are those of bodies corresponding to cover sizes.

Objects of Adjustment:

PB Tray, Except PB Tray: Offset for All Size, A4 long edge feed, B5 long edge feed, A5 long edge feed, 8.5 11 long edge feed, 16K long edge feed, A5 short edge feed, 5.5 8.5 short edge feed, 5.5 8.5 long edge feed, Custom(220~379 mm), Custom(148~219 mm)

Adj. Range: -128~+127 1 step = 0.1 mm

[-] To move closer to the body [+] To move further from the body

07 Cover Trimming Adjustment

Adjust the trimming width of the right cover sheet. To align the lead edges of left and right cover pages, be sure to perform Cover Lead Edge Adjustment in advance.

Objects of adjustment:

Perfect Binder Tray, Except PB Tray

Adj. Range: -128~+127 1 step = 0.1 mm

[-] To narrow [+] To widen

08 Cover Up/Down CD Width Adj.

Adjust the misalignment between the cover sheet and body.

Objects of adjustment:

Perfect Binder Tray, Except PB Tray

Adj. Range: -20~+20 1 step = 0.1 mm

[-] To reduce the distortion [+] To reduce the misalignment

09 Spine Corner Forming Pos.

Adjust the spine corners formed in cover sheets.

Objects of adjustment:

Up/Down Forward Adj., Up/Down Rear Adj.

Adj. Range: -128~+127 1 step = 0.1 mm

[-] To convex [+] To concave

10 Temperature Adjustment

Glue Tank -Low:

Adjust the temperature to control the tank heater.

(Temperature low) Down: viscosity increased

(Temperature high) Up: viscosity decreased

Glue Apply Roller:

Adjust the temperature to control the roller heater. This also supports heating of the glue.

(Temperature low) Down: viscosity increased

(Temperature high) Up: viscosity decreased

Object of Adjustment: Glue Tank -Low

Initial: 185°C

Adj. Range: 180 °C~190 °C 1step = 1 °C

Up: viscosity decreased, Down: viscosity increased

Object of Adjustment: Glue Apply Roller

Initial: 165°C

Adj. Range: 160 °C~170 °C 1step = 1 °C

Up: viscosity decreased, Down: viscosity increased

04 Finisher Adjustment (with Finisher FS-531 or Finisher FS-612 mounted)

This menu item is to be displayed and allowed on the machine mounted with Finisher FS-531 or Finisher FS-612.

01 Fold & Staple Stopper

Adjust the staple positions in Fold & Staple mode.

(Finisher FS-612 only)

Objects of Adjustment:

Offset for All Size, A3 short edge feed, B4 short edge feed, SRA4 short edge feed, A4 short edge feed, 12 18 short edge feed, 11 17 short edge feed, 8.5 14 short edge feed, 8.5 11 short edge feed, 8 13 short edge feed, 8K short edge feed, 16K short edge feed, SRA3 short edge feed, Custom (380 to 458 mm), Custom (279 to 379 mm)

Adj. Range: -128~+127 1 step = 0.1 mm

[-] To move to the right [+] To move to the left

02 Half-Fold Stopper Adj.

Adjust the misalignment of the edges of printed paper.

(Finisher FS-612 only)

Objects of Adjustment:

Offset for All Size, A3 short edge feed, B4 short edge feed, SRA4 short edge feed, A4 short edge feed, 12 18 short edge feed, 11 17 short edge feed, 8.5 14 short edge feed, 8.5 11 short edge feed, 8 13 short edge feed, 8K short edge feed, 16K short edge feed, SRA3 short edge feed, Custom (380 to 458 mm), Custom (279 to 379 mm)

Adj. Range: -128~+127 1 step = 0.1 mm

[-] To lengthen the top face [+] To shorten the top face

03 Punch Adjustment

This menu item is displayed and can be set when Punch Kit PK-511 is mounted on Finisher FS-531 or Finisher FS-612.

01 Vertical Position Adj.

Adjust the misalignment between the center of printed paper and the center of punch holes.

Objects of Adjustment:

Offset for All Size, A3 short edge feed, B4 short edge feed, A4 short edge feed, A4 long edge feed, B5 short edge feed, B5 long edge feed, A5 short edge feed, A5long edge feed, 11 17 short edge feed, 8.5 14 short edge feed, 8.5 11 short edge feed, 8.5 11 long edge feed, 5.5 8.5 short edge feed, 5.5 8.5 long edge feed, 8 13 short edge feed, 8K short edge feed, 16K short edge feed, 16K long edge feed, 9 11 long edge feed

Adj. Range: -50~+50 1 step = 0.1 mm

[-] To move closer to front edge [+] To move closer to rear edge

02 Horizontal Position Adj.

Adjust the distance from the edge of the printed paper to the center of punch holes.

Objects of Adjustment:

PI Tray, Main Body Tray

Adj. Range: -50~+50 1 step = 0.1 mm

[-] To shorten [+] To extend

03 Registration Adjustment

Adjust the registration amount if punch positions are inclined.

Objects of Adjustment:

Main Body/Reverse, Main Body/ADU, PI 1 Tray, PI 2 Tray

Adj. Range: -20~+20 1 step = 0.8 mm

04 Paper Edge Detect Sensor

Automatically adjust the sensitivity of the sensor so as to correctly detect the paper edge that is used as the reference for punch holes.

Start

04 Tri-Fold Adjustment

Adjust the first folded positions in Tri-Fold mode.

(Finisher FS-612 only)

Objects of Adjustment:

Offset for All Size, A4 short edge feed, 8.5 11 short edge feed, 16K short edge feed

Adj. Range: -128~+127 1 step = 0.1 mm

[-]: To widen [+]: To narrow

05 2 Pos. Staple Pitch Adj.

Adjust the staple pitch determined in Fold & Staple and Staple modes.

Objects of Adjustment:

Fold & Staple, Staple

Adj. Range: +128~+160 1 step = 1 mm

06 Post Inserter Tray Size

This menu item is displayed and can be set when Post Inserter PI-502 is mounted on Finisher FS-531 or Finisher FS-612.

Adjust the tray size of post inserter.

Objects of Adjustment:

A4 short edge feed, 8.5 11 short edge feed

Start

07 Output Quantity Limit

Specify the limit on output sheets.

When Finisher FS-531 is mounted

Objects of Adjustment:

Staple / 62-80g/m2, Staple / 81-105g/m2, Staple / 106-135g/m2, Staple / 136-216g/m2

Adjustment range:

Staple / 62-80g/m2

Adj. Range: +2~+50 1 step = 1 sheet

Staple / 81-105g/m2

Adj. Range: +2~+40 1 step = 1 sheet   

Staple / 106-135g/m2 

Adj. Range: +2~+30 1 step = 1 sheet

Staple / 136-216g/m2  

Adj. Range: +2~+20 1 step = 1 sheet

When Finisher FS-612 is mounted

Objects of Adjustment:

Staple / 62-80g/m2, Staple / 81-105g/m2, Staple / 106-135g/m2, Fold & Staple / 62-80g/m2, Fold & Staple / 81-105g/m2, Half-Fold / 62-105g/m2, Tri-Fold / 62 -80g/m2

Adjustment range:

Staple / 62-80g/m2, Staple / 81-105g/m2

Adj. Range: +2~+50 1 step = 1 sheet

Staple / 106-135g/m2

Adj. Range: 0, +2~+20 1 step = 1 sheet

Fold & Staple / 62-80g/m2, Fold & Staple / 81-105g/m2

Adj. Range: +2~+20 1 step = 1 sheet

Half-Fold / 62-105g/m2, Tri-Fold / 62-80g/m2

Adj. Range: +1~+3 1 step = 1 sheet

04 Finisher Adjustment (Relay Unit RU-510)

This menu item is to be displayed and allowed on the machine mounted with Relay Unit RU-510.

06 Relay Stacker Adjustment (Relay Unit RU-510)

01 Paper Width Adjustment

Adjust the alignment plate position in the crosswise direction of Relay Unit RU-510. Perform this adjustment when paper distortion or skew is detected in the finisher following Relay Unit RU-510.
For example, adjust a misalignment of punch holes in the crosswise direction.

Adj. Range: -20~+20 1 step = 0.1 mm

[-] To reduce the randomness [+] To reduce the tilts

02 Paper Length Adjustment

Adjust the alignment plate position in the paper feed direction of Relay Unit RU-510. Perform this adjustment when paper distortion or skew is detected in the finisher following Relay Unit RU-510.
For example, adjust a misalignment of punch holes in the crosswise direction.

Adj. Range: -50~+50 1 step = 0.1 mm

[-] To reduce the dispersion [+] To reduce the tilts

05 Scan Adjustment

Make adjustments related to the scanning function.

01 Restart Timing Adjustment

Adjust the scan starting position when scanning the original on the original glass.

Objects of adjustment:

Scanning device of the original glass

Adj. Range: -30~+30 1 step = 0.1 mm

[-] Image Slow [+] Image Fast

02 Centering Adjustment

Adjust the image position in the crosswise direction when scanning the original on the original glass.

Prerequisite: Printer Centering Adjustment is completed.

Objects of adjustment:

Orig. Glass Centering

Adj. Range: -57~+57 1 step = 0.1 mm

[-] Back [+] Front

03 FD-Mag. Adjustment

Adjust the magnification in feed direction when scanning the original on the original glass.

Prerequisite: Printer FD-Mag. Adjustment is completed.

Objects of adjustment:

Scanning device of the original glass

Adj. Range: 990~1010 1 step = x 0.001

[-] Short [+] Long

04 CD-Mag. Adjustment

Adjust the magnification in the crosswise direction when scanning the original from the original glass.

Prerequisite: Printer CD-Mag. Adjustment is completed.

Objects of adjustment:

Scanning device of the original glass

Adj. Range: 990~1010 1 step = x 0.001

[-] Short [+] Long

06 Process Adjustment

01 Front & Back Density

Specify the adjustment value for front and back transfer output voltage automatically set by the machine.

Objects of adjustment:

1st Transfer Y, 1st Transfer M, 1st Transfer C, 1st Transfer K, 1st Trans. (Monochrome), 2nd Transfer Front, 2nd Transfer Back

Adj.Range: -30~+30%

02 Maximum Density Adjustment

Adjust the maximum density for each of Y, M, C, and K. The machine will start the Gamma Automatic Adjustment after you change the maximum density. When the Gamma Automatic Adjustment is completed, proceed to the calibration with the image controller.

Be sure to perform Color Density Manual Control after changing the maximum density.

Yellow: -10, -9, -8, -7, -6, -5, -4, -3, -2, -1, 0, +1, +2, +3, +4, +5, +6, +7, +8, +9, +10

Magenta:-10, -9, -8, -7, -6, -5, -4, -3, -2, -1, 0, +1, +2, +3, +4,+5, +6, +7, +8, +9, +10

Cyan: -10, -9, -8, -7, -6, -5, -4, -3, -2, -1, 0, +1, +2, +3, +4, +5, +6, +7, +8, +9, +10

Black: -10, -9, -8, -7, -6, -5, -4, -3, -2, -1, 0, +1, +2, +3, +4, +5, +6, +7, +8, +9, +10

03 Max. Density Auto Adj. 

Automatically print and scan charts and then adjust the maximum density for each of Y, M, C, and K. When this adjustment is completed, proceed to the calibration with the image controller. Be sure to perform Color Density Manual Control after changing the maximum density.

When Relay Unit RU-518 is mounted on the machine without Integrated Color Care Unit IQ-501, Max. Density Auto Adj. (RU) is displayed.

If either optional unit is not mounted on the machine, this function is not displayed. 

-

07 Quality Adjustment

Adjust the image quality.

01 IDC Sensor Adjustment

Adjust the IDC sensor using a scanner.

Screen 1, Screen 2, Contone, Stochastic

02 Highlight Automatic Adj.

Change the printer gamma curve automatically to adjust the gradation and background density in highlights.

Screen 1 (Y, M, C, K)

Screen 2 (Y, M, C, K)

Stochastic (Y, M, C, K)

03 Highlight Adjustment

Change the printer gamma curve to adjust the gradation and background density in highlights.

Screen 1 (Y, M, C, K)

Screen 2 (Y, M, C, K)

Stochastic (Y, M, C, K)

Adj. Range: -128~+127

04 Stabilization Adj. Setting

Select whether to prioritize job output speed or image quality stability. When you select image quality stability, set the frequency of maximum density correction.

Speed or Stability

Customize of correction operation when image quality stable priority is selected

Maximum Density Adjustment: -2, -1, Normal, +1, +2

05 Custom Screen

Select screens to be used as Screen1, Screen2, and Stochastic, respectively.

Screen 1: Dot270, Dot210, Dot190, Dot175, Dot150, Dot130, Line200, Line180, Line150

Screen 2: Dot270, Dot210, Dot190, Dot175, Dot150, Dot130, Line200, Line180, Line150

Stochastic: FM1, FM2, FM3

06 Controller Image Comp. Set

Make this setting to smooth the jagged outlines of the text or line images.

Gradation Priority, Resolution Priority

07 Tone Curve for Each Tag Setting

Select whether or not to allow tone curve adjustment for each tag (image, text/graphic).

Do Not Execute Adjustment, Execute Each Tag Adj.

08 Density Balance Adjustment

01 Density Balance Auto. Adj.

Perform the density balance adjustment using the scan function. The result (adjustment value profile name) is displayed in list view. Select a profile to be enabled.

02 Density Balance Chart Output

Output the chart for density balance adjustment.

Objects of adjustment:

Measure Spectrophotometer-1 (FD-9), Measure Spectrophotometer-1 (i1-iSisXL), Measure Spectrophotometer-2 (i1-Pro/i1-Pro2)

Type 1, Type 2

Measure Spectrophotometer-3 (FD-5 BT)

Type 1, Type 2, Type 3

03 Density Balance Data Reg/Del

Load the colorimetric data, or manually register the data on the machine.

08 Execute Adjust Operation

Execute each of the four adjustment operations manually.

Gamma Automatic Adj., Color Regist. Auto Adj., Toner Refresh Mode, Belt Refresh Mode

09 ADF Adjustment

01 ADF Original Stop Pos. Adj.

Adjust the position to start scanning on the ADF and the image position in the crosswise direction.

Prerequisite: FD-Mag. Adjustment should be completed before adjusting the position to start scanning. Printer Centering Adjustment should be completed before adjusting the image position.

Objects of adjustment:

Restart Timing(Front), Restart Timing(Back)

Adj. Range: -40~+40 1 step = 0.1 mm

[-] Image Fast [+] Image Slow

Objects of Adjustment:

Centering(Front), Centering(Back)

Adj. Range: -44~+44 1 step = 0.1 mm

[-] Front [+] Back

02 ADF Orig. Stop Pos. Auto

Automatically adjust the position to start scanning on the ADF and the image position in crosswise direction.

Prerequisite: FD-Mag. Adjustment should be completed before adjusting the position to start scanning. Printer Centering Adjustment should be completed before adjusting the image position.

Objects of adjustment:

Restart Timing(Front), Restart Timing(Back)

Centering(Front), Centering(Back)

03 FD-Mag. Adjustment

Adjust the magnification in paper feed direction when scanning on the ADF.

Prerequisite: Printer FD-Mag. Adjustment is completed.

Objects of adjustment:

ADF

Adj. Range: -20~+20 1 step = 0.1 %

[-] Short [+] Long

04 FD-Mag. Auto Adjustment

Automatically adjust the magnification in paper feed direction when scanning on the ADF.

Adjustment Range:

ADF

05 Line Detection(Front Side)

Set the detection level of white lines on Side 1, warning display, and whether or not to stop the scanning of the original using ADF.

Detection Level: Strict, Medium, Mild, OFF

Warning Display: Icon + Warning Display, Icon,Warning Display

Scan Prohibit Set.: Allow, Restrict

06 Line Detection(Back Side)

Set the detection level of white lines on Side 2, warning display, and whether or not to stop the scanning of the original using ADF.

Detection Level: Strict, Medium, Mild, OFF

Warning Display: Icon + Warning Display, Icon,Warning Display

Scan Prohibit Set.: Allow, Restrict

07 Home Read Position Adj(Back)

Adjust the home position of the shading shaft to correct any image failure due to dirt on the shading shaft on the back side of the ADF.

Adj. Range: -4~+4 1 step = 1

08 FD-Mag. Adjustment(Back)

Adjust the magnification in paper feed direction on the back side when scanning on the ADF.

Prerequisite: Printer FD-Mag. Adjustment is completed.

Objects of adjustment:

ADF

Adj. Range: -20~+20 1 step = 0.1 %

[-] Short [+] Long

09 FD-Mag. Auto Adj.(Back)

Automatically adjust the magnification in paper feed direction on the back side when scanning on the ADF.

Objects of adjustment:

ADF

10 Main Scan Dir. Zoom(Back)

Adjust the magnification in crosswise direction on the back side when scanning on the ADF.

Prerequisite: Printer CD-Mag. Adjustment is completed.

Objects of adjustment:

ADF

Adj. Range: -10~+10 1 step = 0.1 %

[-] Short [+] Long

11 Main ScanDir.Zoom Auto(Back)

Automatically adjust the magnification in crosswise direction on the back side when scanning on the ADF.

Objects of adjustment:

ADF

12 Original Tray Pre-rise Set.

Adjust the standby position of the Original feed tray on the ADF.

Original Tray Pre-rise: ON, OFF

Objects of adjustment: Paper Tray

Adjustment range: (1-7)

10 Corner Staple(Back) Angle

Select between diagonal and parallel stapling on the left corner.

Diagonal, Parallel

06 List/Counter

Outputs User Management List, etc. Also, collectively save data on the USB flash drive connected to the USB port.

User Management List, Use Management List, Font Pattern List

07 Size Setting

Specify the settings related to paper sizes of the originals to be placed on the original glass or ADF, or of the paper placed in the Post Inserter.

01 Detect Orig. Size on Glass

Table1, Table2