Overview of Paper Setting

Paper Type

The following seven paper types are provided according to the plainness of paper.

For details on paper types, refer to Paper types.

Paper Type:

Plain, Fine, Color Specific, Coated-GL, Coated-ML, Coated-GO, Coated-MO, Textured^*1

Profile Name

No entry can be made in setting the paper conditions for the tray to be used. Enter the paper profile name when you register the paper conditions specified for a tray.

Up to 50 one-byte characters (25 two-byte characters) can be entered for the name.

Paper Size

Selecting Standard automatically detects the standard size of paper loaded in the selected tray.

Selecting Custom allows you to enter the desired dimensions from the screen. This setting can also be made by recalling a custom size previously registered.

To specify Tab Paper, select either A4Tlong edge feed or 8.5 11Tlong edge feed, and specify the number of tabs.

Standard:

Detectable standard sizes vary depending on the paper tray.

Custom:

Tray 1: Widthwise 139.7 mm to 330.2 mm, Lengthwise 182.0 mm to 431.8 mm / Widthwise 5.50" to 13.00", Lengthwise 7.17" to 17.00"

Tray 2: Widthwise 139.7 mm to 330.2 mm, Lengthwise 182.0 mm to 487.7 mm / Widthwise 5.50" to 13.00", Lengthwise 7.17" to 19.20"

Tray 3 (Paper Feeder Unit PF-602m): Widthwise 100.0 mm to 330.2 mm, Lengthwise 182.0 mm to 487.7 mm / Widthwise 3.94" to 13.00", Lengthwise 7.17" to 19.20"

Tray 4 (Paper Feeder Unit PF-602m): Widthwise 100.0 mm to 330.2 mm, Lengthwise 148.0 mm to 487.7 mm / Widthwise 3.94" to 13.00", Lengthwise 5.83" to 19.20"

Tray 3 to Tray 11 (Paper Feed Unit PF-707m): Widthwise 100.0 mm to 330.2 mm, Lengthwise 148.0 mm to 487.7 mm / Widthwise 3.94" to 13.00", Lengthwise 5.83" to 19.20"

Tray 3 (Large Capacity Unit LU-202m): Widthwise 210.0 mm to 330.2 mm, Lengthwise 182.0 mm to 487.7 mm / Widthwise 8.27" to 13.00", Lengthwise 7.17" to 19.20"

Tray 3 (Large Capacity Unit LU-202XL): Widthwise 210.0 mm to 330.2 mm, Lengthwise 182.0 mm to 762.0 mm / Widthwise 8.27" to 13.00", Lengthwise 7.17" to 30.00"

Tray 3 to Tray 6 (Large Capacity Unit LU-202XLm): Widthwise 210.0 mm to 330.2 mm, Lengthwise 182.0 mm to 762.0 mm / Widthwise 8.30" to 13.00", Lengthwise 7.17" to 30.00"

Bypass tray (Multi Bypass Tray MB-506 or Multi Bypass Tray MB-508) Widthwise 139.7 mm to 330.2 mm, Lengthwise 182.0 mm to 431.8 mm / Widthwise 5.24" to 13.00", Lengthwise 7.17" to 17.00"

Banner Tray Unit MK-740 or Output tray reinforcing unit for banner MK-740m: Widthwise 100.0 mm to 330.2 mm^*2, Lengthwise 148.0 mm to 1300.0 mm / Widthwise 3.94" to 13.00 "^*2, Lengthwise 5.83" to 51.20"

Folding Unit FD-503 - Post Inserter Tray: Widthwise 182.0 mm to 331.0 mm, Lengthwise 139.0 mm to 483.0 mm / Widthwise 7.17" to 13.03", Lengthwise 5.47" to 19.02"

Finisher FS-531 or Finisher FS-612 mounted with Post Inserter PI-502 (upper tray): Widthwise 182.0 mm to 330.0 mm, Lengthwise 139.0 mm to 297.0 mm / Widthwise 7.17" to 13.00", Lengthwise 5.47" to 11.69"

Finisher FS-532 mounted with Post Inserter PI-502 (upper tray): Widthwise 182.0 mm to 330.0 mm, Lengthwise 139.0 mm to 297.0 mm / Widthwise 7.17" to 13.00", Lengthwise 5.47" to 11.69"

Finisher FS-531 or Finisher FS-612 mounted with Post Inserter PI-502 (lower tray): Widthwise 182.0 mm to 330.0 mm, Lengthwise 139.0 mm to 482.0 mm / Widthwise 7.17" to 13.00", Lengthwise 5.47" to 19.00"

Finisher FS-532 mounted with Post Inserter PI-502 (lower tray): Widthwise 182.0 mm to 330.0 mm, Lengthwise 139.0 mm to 482.0 mm / Widthwise 7.17" to 13.00", Lengthwise 5.47" to 19.00"

The cover tray of Perfect Binder PB-503 can be specified in the range of Widthwise 139.0 mm to 307.0 mm, Lengthwise 279.0 mm to 472.0 mm / Widthwise 5.24" to 12.09", Lengthwise 10.98" to 18.58".

Up to 20 custom sizes can be registered and recalled.

Tab Paper:

A4Tlong edge feed, 8.5 11Tlong edge feed (number of tabs: 1 to 15)

Weight

Select the paper weight. Four types of coated paper become available when the weight over 81 g/m² / 22 lb Bond is selected.

The unit of weight can be switched. The unit used to register the condition is also used to display that condition on the MACHINE screen and the COPY screen when called.

Weight:

(1) 62-74 g/m2 / (1) 16-19 lb Bond

(2) 75-80 g/m2 / (2) 20-21 lb Bond

(3) 81-91 g/m2 / (3) 22-24 lb Bond

(4) 92-105 g/m2 / (4) 25-28 lb Bond

(5) 106-135 g/m2 / (5) 29-36 lb Bond

(6) 136-176 g/m2 / (6) 37-47 lb Bond

(7) 177-216 g/m2 / (7) 48-57 lb Bond

(8) 217-256 g/m2 / (8) 58-68 lb Bond

(9) 257-300 g/m2 / (9) 69-81 lb Bond

(10) 301-350 g/m2 / (10) 82-93 lb Bond

Change Unit:

g/m2,, Duodecimo-kg, Octavo-kg, A Book-kg,
B Book-kg, lb Bond, lb Index, lb Cover, lb Book, lb Bristol, lb Tag

Available paper weight varies with each tray.

Main body tray (Tray 1 and Tray 2): 62 g/m² to 256 g/m² / 16 lb Bond to 68 lb Bond

Paper Feeder Unit PF-602m - upper tray (Tray 3): 62 g/m² to 256 g/m² / 16 lb Bond to 68 lb Bond

Paper Feeder Unit PF-602m - lower tray (Tray 4): 62 g/m² to 300 g/m² / 16 lb Bond to 80 lb Bond

Paper Feed Unit PF-707m (Tray 3 to Tray 11): 62 g/m² to 350 g/m² / 16 lb Bond to 93 lb Bond^*3

Large Capacity Unit LU-202m (Tray 3): 62 g/m² to 300 g/m² / 16 lb Bond to 80 lb Bond

Large Capacity Unit LU-202XL (Tray 3), Large Capacity Unit LU-202XLm (Tray 3, Tray 6): 62 g/m² to 300 g/m² / 16 lb Bond to 80 lb Bond (paper of Widthwise 210.0 mm to 330.2 mm, Lengthwise 182.0 mm to 487.7 mm / Widthwise 8.30" to 13.00", Lengthwise 7.17" to 19.20"), 128 g/m² to 300 g/m² / 34 lb Bond to 80 lb Bond (paper of Widthwise 210.0 mm to 330.2 mm, Lengthwise 487.8 mm to 762.0 mm / Widthwise 8.30" to 13.00", Lengthwise 19.20" to 30.00")

Multi Bypass Tray MB-506 (Bypass): 62 g/m² to 350 g/m² / 16 lb Bond to 93 lb Bond

Multi Bypass Tray MB-508 (Bypass): 62 g/m² to 300 g/m² / 16 lb Bond to 93 lb Bond

Banner Tray Unit MK-740, Output tray reinforcing unit for banner MK-740m: 128 g/m² to 256 g/m² / 34 lb Bond to 68 lb Bond^*4

Perfect Binder PB-503 - cover tray: 81 g/m² to 216 g/m² / 22 lb Bond to 57 lb Bond

For the upper tray or lower tray of Post Inserter in Folding Unit FD-503, if Perfect Binder PB-503 is mounted, specify the weight in the range of 81 g/m² to 216 g/m² / 22 lb Bond to 57 lb Bond, taking into account the perfect binding cover specifications. When Perfect Binder PB-503 is not mounted on the machine, the paper weight is not set in the paper setting, but the paper of 50 g/m² to 300 g/m² / 13 lb Bond to 81 lb Bond can be loaded.

The paper weight information for the upper tray or the lower tray of Post Inserter PI-502 is not set in the paper setting. But the paper of 50 g/m² to 200 g/m² / 13 lb Bond to 53 lb Bond can be loaded.

Speed Setting:

High (Available when the weight is set to 216 g/m² / 57 lb Bond or less.) , Middle (Available when the weight is set to 256 g/m² / 68 lb Bond or less.) , Low (Available when the weight is set to 217 g/m² / 58 lb Bond or more.) , Auto Change

Colored Paper

Specify the color of paper. This setting easily gives the color information of paper loaded in the tray.

Colored Paper:

White, Blue, Goldenrod, Gray, Green, Ivory, Orange, Pink, Red, Yellow, Cream, Others, User Color

Punch

Specify whether or not the paper is punched. When pre-punched paper is used, selecting Punch for Output Setting has no effect.

Punch:

Pre-Punched, No Hole-Punch

Both Sides Adj.

Adjust Zoom (Vertical or Horizontal), Image Shift (Up/Down or Right/Left), and Rotate/Skew (rotation or distortion) in each of Front and Back to align the image position between the front and back sides for printing when performing 2-sided printing. Also, Gap or Chart Adjustment can be used for adjustment.

Auto Measure is displayed when Integrated Color Care Unit IQ-501 is mounted on the machine. If Periodical Adjustment is set to ON in Auto Measure, both sides adjustment is automatically performed at the specified intervals.

It is advisable to perform Both Sides Adjust for every paper to be used, as the shrinkage ratio differs according to the paper type, paper brand, or difference in temperature of storage location.

The horizontal zoom of the back side can be specified not to be adjusted in Common Setting.

ZoomVertical:

Front/Back -1.00 to +1.00 (1 step = 0.01%)

ZoomHorizontal:

Front -1.00 to +1.00 (1 step = 0.01%), Back -0.80 to +0.20 (1 step = 0.01%)

Image ShiftUp/Down:

Front/Back -10.0 mm to +10.0 mm (1 step = 0.1 mm)

Image ShiftRight/Left:

Front/Back -3.0 mm to +3.0 mm (1 step = 0.1 mm)

Rotate:

Front/Back -1.00 to +1.00 (1 step = 0.01)

Skew (distortion adjustment):

Front/Back -1.00 to +1.00 (1 step = 0.01)

Periodical Adjustment: ON, OFF

RU Curl Adj.

Corrects the curl (arc-like distortion) of output paper.

When Humidifier HM-103 is mounted on Relay Unit RU-518, you can set Humidifier Set. to ON or OFF.

RU Curl Adj.:

ON, OFF, Reset

-10 to +10

Humidifier Set.: ON, OFF

Humidifying Amount: Standard, High

Air Assist

Use this function to blow air to paper in order to prevent feeding multiple sheets or paper jam, which is likely to occur depending on the paper type.

With Paper Feeder Unit PF-602m mounted

Auto, ON(Strong), ON(Weak), OFF

With Paper Feed Unit PF-707m mounted

Auto, Manual

When Manual is selected, the following settings are available.

Lead Edge Air Level Setting: Weak 1 to 9 Strong

Side Air Level Setting: Weak 1 to 9 Strong, OFF

With Large Capacity Unit LU-202m, Large Capacity Unit LU-202XL, Large Capacity Unit LU-202XLm, or Perfect Binder PB-503 mounted

Auto, ON, OFF

Thickness

The machine mounted with Image Controller IC-605 provides Thickness on the screen, and selecting Specify allows the machine to estimate the remaining amount of paper in the tray with greater accuracy.

Not Specify, Specify

Adjustment Range: 0.050 mm to 0.500 mm

Expert Adj.

Sets the transfer, separation, or fusing process and other advanced adjustments.

For details about the Mis-centering Detect JAM setting, refer to [Print Job JAM Setting].

Expert Adjustment is not displayed by default. Contact your service representative.

2nd Transfer Output Adj.(Front): -50 to +50

2nd Transfer Output Adj.(Back): -50 to +50

2nd Transfer-Lead Edge(Front): -50 to +50

2nd Transfer-Lead Edge(Back): -50 to +50

2nd Transfer-Rear Edge(Front): -50 to +50

2nd Transfer-Rear Edge(Back): -50 to +50

Separation AC(Front): -600 to +600

Separation AC(Back): -600 to +600

Separation DC(Front): -60 to +60

Separation DC(Back): -60 to +60

Upper Fusing Roller Temperature: -20 to +20

Lead Edge Erase Quantity: 0 to +200

Temp. Gap of Fus. Edge and Mid.: -10 to +10

Lower Fusing Roller Temperature: -15 to +70

Rear Edge Erase Quantity: 0 to +200

Back on Top Output Timing Adj.: 0 to +10

ADU Reverse Timing: -6 to +6

Fusing Speed(Front Side): -200 to +200

Fusing Speed(Back Side Offset): -200 to +200

Registration Loop(Front): -99 to +99

Registration Loop(Back): -99 to +99

IQ Transport Roller Speed Adj.: 0 to +20

Registration Speed: -50 to +50

Reverse De-Curler Speed: -200 to +200

Reverse Speed(RevExit): -200 to +200

Reverse Speed(ADU): -200 to +200

Banner Reverse Speed1: -200 to +200

Output De-Curler Speed: -200 to +200

Regist. Speed(Banner): -50 to +50

Banner Reverse Speed2: -200 to +200

Reverse Gate SW Timing: -30 to +30

RU Speed Adjustment(Banner): -100 to +100

Up Fusing Initial Temp.: Auto, OFF

2nd Trans. Pressure: Auto, High, Normal, Low

CPM Down: Normal, Down

Toner Amount Save: ON, OFF

Dens. Adj. Per Tray (YMC): 0 (Normal), +1, +2, +3 (Max)

Dens. Adj. Per Tray (K): 0 (Normal), +1, +2, +3 (Max)

Mis-centering Detect JAM: Detect, Not Detect

Double Feed Detection: Detect, Not Detect

Int. Transfer Separation: Auto, ON, OFF

Thick BK Mode: ON, OFF

Feed Correction Level: 0 (Normal), -1, -2

Output Curl Adjustment: Auto, 0, +1, +2

Output Curl (Back on Top): Auto, 0, +1, +2

Paper Feed Assist Tray: Auto, Manual, Productivity, Paper Feeding

Centering Adj.(Front): ON(Blank), ON(PrePrinted), OFF, Detect Setting, (1) Detection Position (5 ~ 25mm), Paper Color(Light), Paper Color(Dark)

Centering Adj.(Back): ON(Blank), ON(PrePrinted), OFF, Detect Setting, (1) Detection Position (5 ~ 25mm), Paper Color(Light), Paper Color(Dark)

Long Paper Shaking Set: Auto, Manual

Fusing Air Separation Air Level Setting: Weak (1) to (7) Strong, Auto (3)

Change Fusing Pressure: Auto, Normal, Weak

Hard Paper Mode: ON, OFF

PFU Suction Air Level: Weak (1) to (9) Strong, Auto (9)

Output Paper Separation Setting: ON(Uncoated), Manual, OFF, Offset Value, Offset Value (-50 to 100)

Output Cooling Air Level Adj.: Weak (0) to Strong (8), Auto (0)

Color Density

When Quality Adjustment - Color Density Control - Basic Setting - Use Color Density Control is set to ON on the Adjustment Menu screen, you can configure the color density control settings.

Each Paper Type Color Adj. Data: Default Adj. Data, Registered Adj. Data, OFF

Plain, Fine, Color Specific

62-74 g/m216-19 lb Bond

75-80 g/m2 / 20-21 lb Bond

Coated-GL, Coated-ML, Coated-GO, Coated-MO

81-91 g/m2 / 22-24 lb Bond

92-105 g/m2 / 25-28 lb Bond

106-135 g/m2 / 29-36 lb Bond