Printer Status

Ready

Shows that the main body has no error.

Sub Power Off

Shows that the sub power switch of the machine is off.

Service Call

Shows that the service call failure occurs at the main body or the image controller.

Cover Open

Shows that the door of the main body is open.

Paper Jam

Shows that the paper jam occurs in a place other than ADF. Remove the jammed paper following the instructions displayed on the touch panel.

ADF Cover Open

Shows that the cover is open when scanning data on the ADF.

ADF Jam

Shows that the paper jam has occurred in ADF.

Output Tray Full

Shows that either of output trays is full.

Toner Empty

Shows that the toner level of either of toner bottles is empty.

Humidifier Tank Empty

Shows that the humidifier tank is empty.

No Paper

Shows that paper needs to be replenished for the job currently printing.

Key Counter Unset

Shows that the key counter is not set.

Administrator Mode

Shows that the machine is in the administrator mode.

Hold Job Full

Shows that the Hold job list is full.

Waste Toner Full

Shows that the waste toner box is full.

Punch Dust Full

Shows that the punch-hole scraps box is full.

Staple Dust Full

Shows that the staple scraps box is full.

Trim Scrap Full

Shows that the trimmer receiver is full.

Slitting Scrap Box Full

Shows that the slitting scrap box is full.

Staple Empty

Shows that the staple cartridge is empty.

Ring Bind Part Empty

Shows that ring bind parts runs out.

Life Limit

Shows that the glue hopper for the perfect binding is empty or it is necessary to exchange the SD trimmer receiver.

HDD Near Full

Shows that the HDD is running out of space.

Toner Near Empty

Shows that the toner level of either of toner bottles is low.

Waste Toner Near Full

Shows that the waste toner box is running out.

Near Life Limit

Shows that the life limit of the SD trimmer receiver is near.

Maintenance Required

Shows that the life limit of the consumables are over.

Low Power Mode

Shows that the machine is in the low power mode.

Shut OFF Mode

Shows that the machine is shut off.

Warming Up

Shows that the machine or the perfect binding option are warming up.

Now Adjusting

Shows that the machine is now adjusting.

Error

Indicates that the print job stopped due to an unknown cause.

Print Paused

Indicates that the print job was temporarily stopped by the user.

Print Hold by Warning

Indicates that the print job was temporarily stopped due to an unknown cause.

Printing

Indicates that the print job is currently printed.

Canceling

Indicates that the print job is currently canceled.

Indicates a warning.

Indicates an error.