Configuring Reset Operations (for the administrator)

To change the time required to reset the system and the mode to be displayed after resetting ([System auto reset])

To display:

[Utility]
- [Administrator]
  - [System Settings]
    - [Reset Settings]
      - [System auto reset]

Select whether to reset all settings (except registered settings) when this machine has not been operated for a certain period of time.

Setting	Description
[System auto reset function]	When using the system auto reset function, set this option to ON (default: ON).
[System Auto Reset Time]	Specify the time required to reset (default: [1] minute, available range: [1] to [9] minutes).
[Screen to display after startup/Reset]	Select a screen that is to be displayed preferentially after resetting (default: [Main Menu]). This setting is only applied to the classic style screens.

Setting

Description

[System auto reset function]

When using the system auto reset function, set this option to ON (default: ON).

[System Auto Reset Time]

Specify the time required to reset (default: [1] minute, available range: [1] to [9] minutes).

[Screen to display after startup/Reset]

Select a screen that is to be displayed preferentially after resetting (default: [Main Menu]).

This setting is only applied to the classic style screens.

Log out of the Administrator Setting or User Auth/Account Track mode according to the time setting for [System Auto Reset Time] when user authentication/account track is active or the [Enhanced Security Mode] is enabled. When [System auto reset function] is set to OFF, you are logged out in 1 minute.

To change the time required to reset the currently updated settings ([Auto Reset])

To display:

[Utility]
- [Administrator]
  - [System Settings]
    - [Reset Settings]
      - [Auto Reset]

When resetting all the settings (except registered settings) when no operation is performed on each screen of Copy, Scan/Fax, Fax, User Box, and Web browser functions for the specified time, set this option to ON (default: ON). Also, specify the time required to reset (default: [1] minute).

To reset condition settings when changing users or loading an original into the ADF ([Job Reset])

To display:

[Utility]
- [Administrator]
  - [System Settings]
    - [Reset Settings]
      - [Job Reset]

Select whether to reset settings for the conditions that are applied when changing users or loading a document into the ADF.

Setting	Description
[Default Basic/Enlarge Display Common Setting]	When simultaneously specifying the default values of the normal screen display and enlarged display, set this option to ON (default: OFF). If ON is selected, [Default Enlarge Display Settings] is not displayed. Initial values for each mode that are changed in [Default Copy Settings] or [Default Scan/Fax Settings] are applied to both Normal and Enlarge Display modes.
[UserChange]	To initialize all settings (except registered settings) when the key counter or management card is removed, set this option to ON (default: ON).
[When original is set on ADF]	To reset all settings (except registered settings) when document is loaded into the ADF, set this option to ON (default: OFF).
[Next Job]	Select whether to reset Staple Setting, Original Set/Bind Direction settings, and TX Settings for each job. [Staple Setting]: When resetting after the staple job was completed, set this option to ON (default: OFF). [Original Set/Bind Direction]: When resetting after the original loading or bind direction job was completed, set this option to ON (default: OFF). [Reset Data After Job]: Select whether to clear all settings or only destinations when resetting for each job in Scan/Fax TX Settings (default: [Reset All]). If you select [Confirm with User], a confirmation screen appears to check with you if settings or destinations are to be cleared.