Resetting the COPY screen

Copy conditions specified as Initialize

These are the conditions set from the Copy Initial Setting screen on the UTILITY screen.

For details, refer to [Copy Initial Setting].

If Mode Memory Auto Call is ON and data exists in Copy Mode Memory No. 30, the conditions return to the settings in Mode Memory No. 30.

If Mode Memory Auto Call is OFF or data does not exist in Copy Mode Memory No. 30, the conditions comply with Copy Initial Setting.

Copy conditions specified as Full Auto

These settings cannot be changed except Output Setting.

  • Bind Direction: Right&Left

  • Direction: Normal

  • Type: Text/Photo(Print)

  • Special: Normal

  • Thickness:: Normal

  • Original Size: Standard

  • Copy Density: 0

  • Back. Removal: 0

  • Red / Green / Blue / Hue / Saturation / Brightness: 0

  • Sharpness: 0

  • Contrast: 0

  • Distinction: Text 0, Color 0

  • Screen Pattern: Auto

  • Color Balance: 0 for all items

  • Glossy: Standard (Gloss Setting OFF)

  • Zoom: 1.000 (x 1.0)

  • Simplex/Duplex: 1->1 (ADF: ON)

  • Application: None

  • Color: Full Color*

  • Auto Paper: ON

  • Output Setting: Sort**

*: When Mono Energy-save Mode is set to ON, the color mode is Black. For details, refer to [Mono Energy-save Mode].

**: When a finisher is connected, settings selected in the utility settings are set (UTILITY - User Setting - System Setting - Reset Setting - Job Reset Setting - Finisher Mode when Full Auto).