Checking the List of Optional Components (ineo+ 658/558/458)

1

Main unit

Scans the original in the scanner section, and prints a scanned image in the printer section.

This unit is referred to as "machine", "main unit", or "ineo+ 658/558/458" in the manual.

2

Fax Kit FK-514

Used to operate this machine as a fax machine. Alternatively, this kit allows more telephone lines to be connected.

3

Clean Unit CU-102

Collects small particles (UFP) generated in this machine to prevent them from escaping this machine.

4

Authentication Unit AU-102

Performs user authentication by scanning vein patterns in the finger.

The Working Table WT-506 is required to install the Authentication Unit AU-102.

This unit is referred to as an Authentication Unit in the manual.

5

Authentication Unit AU-201S

Performs user authentication by scanning information recorded on the IC card or NFC-compatible Android terminal.

The Mount Kit MK-735 is required to install the Authentication Unit AU-201S.

This unit can also be installed on the Working Table WT-506.

This unit is referred to as an Authentication Unit in the manual.

6

Working Table WT-506

Provides an area to temporarily place an original or other materials. This is also used when the Authentication Unit AU-102 or Authentication Unit AU-201S is installed.

7

Keypad KP-101

It is equipped on the side of the Control Panel.

Allows you to enter numbers by using the Hardware Keypad.

8

Keyboard Holder KH-102

Install this holder to use a external keyboard.

For details on external keyboards, contact your service representative.

9

Security Kit SC-508

Supports the copy guard and password copy functions to prevent unauthorized copying.

10

Mount Kit MK-730

Used to print data on banner paper.

This unit is referred to as Banner Paper Loading Guide in the manual.

11

Large Capacity Unit LU-302

Allows you to load up to 3000 sheets of 8-1/2 11 (A4) size.

This unit is referred to as a Large Capacity Unit in the manual.

To install the Large Capacity Unit LU-302, the Paper Feed Cabinet PC-415, Paper Feed Cabinet PC-115, or Paper Feed Cabinet PC-215 must be installed on this machine.

12

Large Capacity Unit LU-207

Allows you to load up to 2500 sheets of SRA3 or 11 17 (A3) size.

To change the paper size, contact your service representative.

This unit is referred to as a Large Capacity Unit in the manual.

To install the Large Capacity Unit LU-207, the Paper Feed Cabinet PC-415, Paper Feed Cabinet PC-115, or Paper Feed Cabinet PC-215 must be installed on this machine.

13

Image Controller IC-416

Provides the high-quality printing result.

Video Interface Kit VI-510 is required to install Image Controller IC-416. Also, Desk DK-510, Paper Feed Cabinet PC-415, Paper Feed Cabinet PC-115, or Paper Feed Cabinet PC-215 must be installed on this machine.

14

Desk DK-705

Used to install this machine on the floor.

This unit is referred to as Desk in the manual.

15

Desk DK-510

Used to install this machine on the floor.

This unit is referred to as Desk in the manual.

16

Paper Feed Cabinet PC-415

Allows you to load up to 2500 sheets of 8-1/2 11 (A4) size.

This unit is referred to as LCT (built-in) in the manual.

17

Paper Feed Cabinet PC-215

Allows you to load up to 500 sheets respectively in the top and bottom trays.

This unit is referred to as Double Paper Feed Cabinet in the manual.

18

Paper Feed Cabinet PC-115

Allows you to load up to 500 sheets in the top tray and use the bottom tray as a storage box.

This unit is referred to as Single Paper Feed Cabinet in the manual.

19

Output Tray OT-506

Outputs printed pages.

20

Job Separator JS-506

Install this unit onto the output tray of this machine.

This unit sorts printed sheets.

This unit is referred to as Job Separator in the manual.

This unit can only be installed in the ineo+ 558/458.

21

Finisher FS-533

Install this unit onto the output tray of this machine.

Sorts, groups and staples printed paper before outputting it.

This unit can only be installed in the ineo+ 558/458.

22

Punch Kit PK-519

Install this unit onto the Finisher FS-533.

This unit supports the punching function.

This unit can only be installed in the ineo+ 558/458.

23

Finisher FS-536

Sorts, groups and staples printed paper before outputting it.

To install the Finisher FS-536, the Relay Unit RU-513 is required. Also, Desk DK-510, Paper Feed Cabinet PC-415, Paper Feed Cabinet PC-115, or Paper Feed Cabinet PC-215 must be installed on this machine.

24

Finisher FS-536 SD

Sorts, groups, staples, folds, and binds printed paper before outputting it.

To install the Finisher FS-536 SD, the Relay Unit RU-513 is required. Also, Desk DK-510, Paper Feed Cabinet PC-415, Paper Feed Cabinet PC-115, or Paper Feed Cabinet PC-215 must be installed on this machine.

The Finisher FS-536 contains the Saddle Stitcher.

25

Punch Kit PK-520

Install this unit onto the Finisher FS-536/FS-536 SD.

This unit supports the punching function.

26

Relay Unit RU-513

This unit is required to install the Finisher FS-537/FS-537 SD/FS-536/FS-536 SD on this machine.

27

Finisher FS-537 SD

Sorts, groups, staples, folds, and binds printed paper before outputting it.

To install the Finisher FS-537 SD, the Relay Unit RU-513 is required. Also, Desk DK-510, Paper Feed Cabinet PC-415, Paper Feed Cabinet PC-115, or Paper Feed Cabinet PC-215 must be installed on this machine.

The Finisher FS-537 contains the Saddle Stitcher.

28

Finisher FS-537

Sorts, groups and staples printed paper before outputting it.

To install the Finisher FS-537, the Relay Unit RU-513 is required. Also, Desk DK-510, Paper Feed Cabinet PC-415, Paper Feed Cabinet PC-115, or Paper Feed Cabinet PC-215 must be installed on this machine.

29

Punch Kit PK-523

Install this unit onto the Finisher FS-537/FS-537 SD.

This unit supports the punching function.

30

Z Folding Unit ZU-609

Install this unit onto the Finisher FS-537/FS-537 SD.

This unit supports the Z-fold function.

This unit is referred to as a Z Folding Unit in the manual.

31

Post Inserter PI-507

Install this unit onto the Finisher FS-537/FS-537 SD.

This unit allows you to insert cover sheets into the copied or printed sheets. This unit also allows you to manually operate the finisher (only the lower tray is available).

32

Job Separator JS-602

Install this unit onto the Finisher FS-537/FS-537 SD.

This unit sorts printed sheets.

This unit is referred to as Job Separator in the manual.

1

Stamp Unit SP-501

Stamps a scanned original when sending a fax. This unit allows you to check that the original has been scanned.

2

Spare TX Marker Stamp 2

A replacement stamp for the Stamp Unit SP-501.

3

Local Interface Kit EK-608

Install this unit when using the voice guidance function.

The speaker and USB port are added.

This unit is referred to as the Local Interface Kit in the manual.

4

Local Interface Kit EK-609

Install this unit when using the voice guidance function or the connection function with a Bluetooth LE-compatible iOS terminal.

The speaker, USB port, and receiving device for Bluetooth LE communication are added.

This unit is referred to as Local Interface Kit or Local Interface Kit (voice guidance / Bluetooth LE compatible).

• For details on the association with an iOS terminal, refer to Here.

• For details on the user authentication of an iOS terminal, refer to Here.

5

Video Interface Kit VI-510

This unit is required to install Image Controller IC-416.

6

i-Option LK-102 v3

Supports the PDF processing function that is one of the advanced functions.

7

i-Option LK-104 v3

Supports the voice guidance function that is one of the advanced functions.

8

i-Option LK-105 v4

Supports the searchable PDF function that is one of the advanced functions.

9

i-Option LK-106

Used to add a bar code font that is one of special fonts.

10

i-Option LK-107

Used to add a unicode font that is one of special fonts.

11

i-Option LK-108

Used to add an OCR font that is one of special fonts.

In the standard, the OCR-B font (PostScript) is available. Installing the i-Option LK-108 allows use of the OCR-A font (PCL).

12

i-Option LK-110 v2

Used to add an advanced function that converts a file into the DOCX or XLSX type or generates highly-functional and high-quality data.

i-Option LK-110 v2 includes the function licenses for i-Option LK-102 v3 and LK-105 v4. If you purchase i-Option LK-110 v2, you do not need to purchase i-Option LK-102 v3 or LK-105 v4.

For details about functions able to be added, refer to Here.

13

i-Option LK-111

Supports the ThinPrint function that is one of the advanced functions.

14

i-Option LK-114

Supports the serverless pull printing function that is one of the advanced functions.

15

i-Option LK-115 v2

You can use TPM (Trusted Platform Module) that is one of the advanced functions. Security enhancement is realized by encrypting confidential information such as certificates and passwords of this machine.

16

Upgrade Kit UK-212

Allows you to use this machine in a wireless network environment.

This unit is referred to as the Wireless LAN Interface Kit in the manual.

17

Heater HT-509

Prevents paper in a paper tray from being affected by humidity.

The Heater HT-509 can be mounted when you purchase the Paper Feed Cabinet PC-115, Paper Feed Cabinet PC-215, Paper Feed Cabinet PC-415, or Desk DK-510.

18

Power Supply BOX MK-734

Turns on/off the Heater operations.

The Power Supply BOX MK-734 can be mounted when you purchase the Paper Feed Cabinet PC-115, Paper Feed Cabinet PC-215, Paper Feed Cabinet PC-415, or Desk DK-510.

19

Transformer kit TK-101

This unit is required to enable the Heater of the Large Capacity Unit LU-302 or Large Capacity Unit LU-207 to function.

20

Double feed detection Kit UK-501

This unit allows you to detect that pages of the original are multiplexed on the ADF.

21

Mount Kit MK-735

Required to have Authentication Unit AU-201S built in to the main unit.

22

Hard Disk HD-524

Install this unit to perform mirroring of the hard disk contained in the main unit.

1

Output Tray

Outputs printed pages.

2

Paper-Empty Indicator

Flashes in orange when a tray runs low on paper, and lights up when a paper-out occurs.

3

LCT (built-in)

Allows you to load up to 2500 sheets.

This tray can hold up to 1000 sheets of Thick 1, Thick 1+, Thick 2, and Thick 3.

4

Bottom Right Door

Open this door when clearing a paper jam in the Tray3 or Tray4 transport unit.

5

Bottom Right Door Release Lever

Used to lock the Bottom Right Door.

6

Tray3

Allows you to load up to 500 sheets.

This tray can hold up to 150 sheets of Thick 1, Thick 1+, Thick 2, and Thick 3.

7

Tray4/Storage Box

Used as a Storage Box when installing Single Paper Feed Cabinet.

This box allows you to load up to 500 sheets when Double Paper Feed Cabinet is installed.

This tray can hold up to 150 sheets of Thick 1, Thick 1+, Thick 2, and Thick 3.

1

Heater Power Switch

Used to turn Heater operations on or off. This function prevents paper from being affected by humidity when the power is turned on.

The Heater is available when you purchase Single/Double Paper Feed Cabinet, LCT (built-in), Desk, or Large Capacity Unit.

To use the Large Capacity Unit, the Transformer kit TK-101 is required separately.

2

Jack for connecting a telephone (TEL PORT1)

Used to connect a telephone cord.

Connect the cord to this connector even when using multiple lines.

3

Telephone Jack 1 (LINE PORT1)

Used to connect a general telephone subscriber line.

Connect the cord to this connector when using only one telephone line.

4

Telephone Jack 2 (LINE PORT2)

Used to connect a general telephone subscriber line.